Using other equipment
➡ Page 11 for the position of the remote control buttons.
Enjoying more powerful bass | Changing the remote control code |
equipment
•Connect an active subwoofer (not included).
•Place the subwoofer as close as possible to the front center.
AM ANT | FM ANT |
|
|
| |
EXT | LOOP | 75Ω |
| Audio cable |
|
|
| AUX |
| To the | |
R | L |
|
|
| |
SUBWOOFER |
|
|
| subwoofer's | |
| OUT |
|
|
|
|
|
| L | AC IN |
| input terminal |
|
|
|
|
| |
|
|
| Adjusting the bass |
| |
Press [SHIFT] + [SUBWOOFER]. |
| ||||
Every time you do this:
SUB.W ON 
SUB.W OFF
Adjust the volume on the subwoofer to suit your preference.
Change the code if you find the remote control unintentionally also controls other equipment.
1Change the main unit’s code.
Press [TUNER/AUX] to select “AUX”.
Press and hold [TUNER/AUX] on the main unit and then press and hold [2] (or [1]) on the remote control.
“REMOTE 2” appears on the display.
2Change the remote control’s code.
Press and hold [ENTER] and [2] (or [1]) on the remote control for at least 2 seconds.
If the remote control and main unit are using different codes, a message appears on the main unit’s display showing the main unit’s current code. Follow step 2 to change the remote control’s code to match it.
Using other
RQT7932
Other antenna connections
Use outdoor antennas if radio reception is poor.
FM outdoor antenna (using a television antenna)
•Disconnect the FM indoor antenna.
•The antenna should be installed by a competent technician.
Rework your outdoor antenna’s 75 Ω coaxial cable as follows. FM outdoor antenna
FM ANT
| 75 Ω coaxial cable |
75 Ω |
|
| Antenna plug |
| (included) |
1) Remove a piece of the | 2) Carefully pull the tabs apart |
outer vinyl insulator. | to remove the cover. |
10 mm (13/32”) |
|
10 mm (13/32”) Peel back |
|
7 mm (9/32”) |
|
3) Install the coaxial cable. | 4) Attach the cover. |
Clamp the cable conductor, |
|
and wind it on so that it does |
|
not contact anything else. |
|
Clamp with pliers
AM outdoor antenna
AM outdoor antenna
5-12m
AM loop antenna (included)
•Run a piece of vinyl wire horizontally across a window or other convenient location.
•Leave the loop antenna connected.
30
Note
Disconnect the outdoor antenna when the unit is not in use. Do not use the outdoor antenna during a lightning storm.
