Safety precautions
Placement
Set the unit up on an even surface away from direct sunlight, high temperatures, high humidity, and excessive vibration. These conditions can damage the cabinet and other components, thereby shortening the unit’s service life.
Place it at least 15 cm away from wall surfaces to avoid distortion and unwanted acoustical effects.
Do not place heavy items on the unit.
Voltage
Do not use high voltage power sources. This can overload the unit and cause a fire.
Do not use a DC power source. Check the source carefully when setting the unit up on a ship or other place where DC is used.
Power cord protection
Ensure the AC power cord is connected correctly and not damaged. Poor connection and lead damage can cause fire or electric shock. Do not pull, bend, or place heavy items on the lead.
Grasp the plug firmly when unplugging the lead. Pulling the AC power cord can cause electric shock.
Do not handle the plug with wet hands. This can cause electric shock.
Foreign matter
Do not let metal objects fall inside the unit. This can cause electric shock or malfunction.
Do not let liquids get into the unit. This can cause electric shock or malfunction. If this occurs, immediately disconnect the unit from the power supply and contact your dealer.
Do not spray insecticides onto or into the unit. They contain flammable gases which can ignite if sprayed into the unit.
Service
Do not attempt to repair this unit by yourself. If sound is interrupted, indicators fail to light, smoke appears, or any other problem that is not covered in these instructions occurs, disconnect the AC power cord and contact your dealer or an authorized service center. Electric shock or damage to the unit can occur if the unit is repaired, disassembled or reconstructed by unqualified persons.
Extend operating life by disconnecting the unit from the power source if it is not to be used for a long time.
Table of contents |
|
GETTING STARTED |
|
Safety precautions | 3 |
Simple setup | 4 |
Disc information | 7 |
QUICK SETUP | 8 |
Overview of controls | 8 |
DISC OPERATIONS |
|
Discs — Basic play | 10 |
Discs — Advanced play | 12 |
Discs — Program and Random play | 13 |
Discs — Using navigation menus | 14 |
Discs — Using | 16 |
Discs — Changing the player settings ... | 18 |
OTHER OPERATIONS |
|
Using the radio | 22 |
Playing and recording using the |
|
cassette tapes | 22 |
Using the microphone | 24 |
Using sound effects | 25 |
Using the timers | 26 |
Using other equipment | 27 |
REFERENCE |
|
Glossary | 30 |
Maintenance | 30 |
When moving the unit | 30 |
Troubleshooting guide | 31 |
Specifications | 34 |
GETTING STARTED DANSK
FRANÇAIS
LANG - 4
LANG - 5
RQTV0238
3
5/3/07 11:55:52 PM |
