Panasonic SC-VK660 Unit displays, Television displays, Using the cassette deck, Disc trays

Unit displays			Page
Although the unit is on	•	Turn off the demo function.	6
standby mode, the display	•	If you set the clock, demo function will be turned off automatically.	—
lights up and changes
continuously.
The display is dark.	•	Press and hold [– DIMMER] to brighten the display.	9
“NO PLAY”	•	You inserted a disc the unit cannot play; insert one that can.	7
	•	You inserted a blank disc.	—
“NO DISC”	•	You have not inserted a disc; insert one.	—
	•	You have not inserted the disc correctly; insert it correctly.	10
“F61”	•	Check and correct the speaker cord connections.	5
		If this does not fi x the problem, there is a power supply problem. Consult the
		dealer.
“DVD U11”	•	Disc is dirty. Wipe it clean.	21
“ERROR”	•	Incorrect operation performed. Read the instructions and try again.	—
“DVD H & &”	•	Trouble may have occurred. The numbers following “H” and “F” depend on the	—
“DVD F & & &”		status of the unit. Turn the unit off and back to on. Alternatively, turn the unit off,
& stands for a number.		disconnect the AC power supply cord, and then reconnect it.
	•	If the service numbers fail to clear, note the service number and contact a	—
		qualifi ed service person.
“REMOTE 1” or “REMOTE 2”	•	Match the modes on the main unit and remote control. Depending on the	28
		number being displayed ( “1” or “2”), press and hold [ENTER] and the
		corresponding numeric button ([1] or [2]) for at least 2 seconds.
Television displays
“This disc may not be	•	You can only play DVD-Video if their region number is the same or includes the	Cover
played in your region”		same region number as the unit or if the DVD Video is marked “ALL”. Confi rm
		the region number for the unit on the back of the main unit.
No on-screen display.	•	Select “On” in “On-Screen Messages” in “Display” tab.	19
“ ”	•	The operation is prohibited by the unit or disc.	—
“Cannot display group xx,	•	You are trying to display incompatible contents.	—
content xx”
“Check the disc”	•	This disc may be dirty.	21
“Authorization Error”	•	You are trying to play the DivX VOD content that was purchased with a different	20
		registration code. You cannot play the content on this unit.
“Rented Movie Expired”	•	The DivX VOD content has zero remaining plays. You cannot play it.	20

REFERENCE

DANSK

FRANÇAIS

Using the cassette deck

Poor quality sound.	•	Clean the heads.	30
Recording is not possible.	•	If the erasure prevention tabs have been removed, cover the holes with	23
		adhesive tape.

Disc trays

Disc tray(s) cannot open.	•	Press [ /I] to release the jammed tray(s) as the unit will switch off. Switch it on	10
“CHGR ERR” is displayed.		again and the tray(s) will initialize to the previous tray(s) condition.	—
	•	If this still does not fi x the problem, please consult the dealer.

LANG - 4

Memory reset (Initialization)

When the following situations occur, refer to the instructions below to reset the memory:

•There is no response when buttons are pressed.

•You want to clear and reset the memory contents.

To reset memory

1Disconnect the AC power supply cord. (Wait at least 3 minutes before proceeding to step 2)

2While pressing and holding down [/I] on the main unit, reconnect the AC power supply cord.

“– – – – – – – – –”appears on the display.

3Release [/I].

All the settings are returned to the factory preset. You will need to reset the memory items.

LANG - 5

RQTV0238

33

SC-VK660_EN(GCS).indd 33 5/4/07 12:01:01 AM