103 | Panasonic SDR-S10 specs

Others

Problem

Check points

≥Has the SD card’s write protect switch been set to LOCK?

#No recording is possible while the write protect switch is set to LOCK. (l 17)

≥Is the memory of the card full?

Recording does not	# If the card has no more available memory, free up
start although the	some memory by deleting unnecessary scenes (l 66)
power is supplied	or use a new card.
to this unit and the ≥ Is the unit set to the video recording mode or picture
SD card is correctly	recording mode?
inserted.	# No recording is possible unless the mode dial is at
	or	.

≥Is the card/battery door open?

#If the card/battery door is open, this unit will not operate normally. Close the card/battery door and slide the card/battery door lock to LOCK.

≥When using an SD card on which data has been written many times and the data writing speed has

	Recording stops	reduced, the recording may suddenly stop during
	suddenly during	motion picture recording.
	motion picture	# Use a card recommended as suitable for motion
	recording on a	picture recording. (l 17)
	card.	If the recording stops even when a suitable SD card is
		used, back up the data on the card to a computer, etc.
		and then format the card. (l 70)

		≥ Are you trying to record small or finely detailed
	Recorded still	objects with [PICT. QUALITY] set at [									]?
	Recorded still	# If you try to record small or finely detailed objects with
	pictures are not
	pictures are not	[PICT. QUALITY] set at [							], the images may break
	clear.	[PICT. QUALITY] set at [							], the images may break
	clear.	up into a mosaic-like pattern. Record with
		up into a mosaic-like pattern. Record with
		[PICT. QUALITY] set at [							] instead. (l 44)

103

VQT1E14

Image 103

Panasonic SDR-S10 operating instructions 103

Contents

Operating Instructions Dear Customer For United Kingdom How to replace the fuse Information for your safetyBefore use EMC Electric and magnetic compatibility Use only the recommended accessories For business users in the European Union Indemnity concerning recording contentCarefully observe copyright laws For the purposes of these operating instructions VQT1E14 Contents Editing TroubleshootingSpecifications Motion picture playback Still picture playback Before using FeaturesWater resistance Shock proof Sales and Support Information For United Kingdom Optional accessories Accessories Open l 14, 19 Battery slot Batt lCard slot SD Card l Before using 16 17 LCD monitor l Attach the 2-way hand strap 1 to this unit About the Card/battery door and the Terminal coverStrap fixture To use as a grip belt To detach from the tripod Using the LCD monitorAdjust the angle of the LCD monitor as desired Attaching to a tripod Recording SD cardConcerning the cards that can be used on this unit Capacity About SD cards that you can use for motion picture recording SD Speed Class Rating Class Handling precautions Setup Power supplyInserting the battery and charging the battery ¬ Rotate the mode dial to select OFF About charging errors To remove the battery Connecting to the AC outletWhen the status indicator is off Charging time Charging time and recordable timeRecordable time How to turn off the power Selecting a modeSelecting a mode Turning the unit on/off How to turn on the power Quick start How to turn the power on and off with the LCD monitorTo turn on the power To turn off the power To cancel Quick start Close the LCD monitor while the mode dial is set to orOpen the LCD monitor Insert/remove the SD card into/from the card slot Inserting/removing an SD card Down Left Right Press to select the item How to use the cursor buttonCard access lamp Basic operations Press the cursor button up, down, left or right to operate Operations during recordingOperations during playback Press the cursor button up, left or right to select an item Video recording mode About the operation icons displayed in each mode Setup Video playback mode Picture playback mode Setup Picture recording mode Press the cursor button right to select Switching the languageHelp mode To exit the help mode While stopped, press the Menu button Using the menu screen To get back to the previous screen Setting date and timeTo exit the menu screen Changing the display style Changing the date and time display styleFor Australia Adjusting the brightness and colour level Adjusting the LCD monitorTo cancel Power LCD Basic camera positioning Before recording About auto mode To end the recording Recording motion pictures Recording mode Remaining time left for recording Screen indications in the video recording modeRecording time elapsed 512 MB 256 MB Recording ≥ Recordable time using the battery l Recording still pictures Rotate the mode dial to select Press the record buttonTo record still pictures clearly Size of still pictures Remaining number of still pictures Screen indications in picture recording modePicture quality for still picture recording Recording with a shutter operation effect Zoom in/out function ¬ Rotate the mode dial to select Press the zoom buttonDigital zoom function To return to normal recording Backlight compensation functionTo use the zoom microphone function Press the cursor button up to select ª Start recording. Fade To cancel fadingFade in/fade out function Press the cursor button left to select To select the colour for fade in/ out Colour night view functionPress the cursor button up to select To cancel the Colour night view function Soft skin modeTo cancel the soft skin mode To stop the timer midway through Self-timer recordingPress the cursor button left to select Ø Recording images with a 169 aspect ratio Wide modeTo cancel the Recording guideline function Recording guideline function Image stabilizer function To cancel the image stabilizer function To cancel the wind noise reduction function Scene modeWind noise reduction function To cancel the scene mode function To restore to the automatic adjustment Manual focus adjustment White balance Outdoor modeUnder incandescent lamps About the white balance sensor a To set the white balance manuallySelect and then fill the screen with a white subject To restore to automatic adjustment Manual shutter speed/ aperture adjustment Manual iris/gain adjustment Manual shutter speed adjustment Press the cursor button in the centre Rotate the mode dial to selectMotion picture playback Select the scene to be played back Fast forward/rewind playback About motion picture compatibilitySlow-motion playback Frame-by-frame playback To adjust the volumePlaying back motion pictures by date Resuming the previous playback Select the file to be played back Still picture playback About still picture compatibility Deleting multiple scenes from the thumbnail display EditingDeleting scenes Deleting scenes one at a time To stop halfway through the deletion To continue deleting other scenesTo complete editing Locking scenes To complete the settings What is DPOF? Dpof settingTo cancel all Dpof settings Formatting an SD card Card management Playback on TV With a TVWith other products To display the on-screen information on the TV screen To watch images with a 169 aspect ratio on a regular TVStart playback on this unit Copying dubbing recordings onto a DVD recorder With a DVD recorder Recording dubbing images onto other video devices With a VCR To stop recording dubbing With a printer PictBridge Connect this unit to a printer Select the layout setting on page Layout Select the paper size setting on Paper SizeWhen you want to stop printing halfway Acrobat Reader With a computer WindowsWhat you can do with a computer Video editing software MotionSD Studio 1.2E End User License Agreement MotionSD Studio 1.2E Operating environment Requirements Disc driveInterface Other Microsoft Windows XP Home Edition Click Next Installing MotionSDInsert the CD-ROM into the computer Click MotionSD Studio 1.2E With a computer Reading the MotionSD Studio operating instructions Connection and recognition procedures Connect this unit and a computer If the driver has not been recognised properly If the driver has been recognised properly Drive icons About the computer displayExample folder structure Click at the very bottom of Tool BOX Using MotionSDStarting MotionSD Studio Closing MotionSD Studio To disconnect the USB cable safely Software uninstallation Copying still pictures onto the computer With a computer MacintoshTo disconnect USB cable safely Still picture recording menus MenusMenu list Motion picture recording menus Motion picture playback menus Play Setup Play Mode l 62 Resume Play l 63 Lock SET lStill picture playback menus Beeps Menus related to SetupOFF Beep Demo Mode Indications IndicationsRecording indications Number display Playback indicationsConfirmatory indications No.10 Cannot Record Messages About recovery Functions that cannot be used simultaneously Battery has worn out and can no longer be used Troubleshooting101 102 103 104 105 106 Others With a computer 107Cable is Others For Australia When carrying the unit, do not drop or bump itAbout this unit 108 Prepare spare batteries when going out for recording About the batteryWhen you are not going to use the unit for an extended time Be sure to detach the battery after use About the SD card About the AC adaptor110 About condensation LCD monitor111 Auto focus Explanation of termsAutomatic white balance White balance Recording a subject in dark surroundings Concerning MPEG2 motion pictures113 Recording a subject behind dirty or dusty window SD Video Camera Specifications114 115 116 32 MB Number of recordable pictures on an SD card117 16 MB 118 IndexNumerics 119 VQT1E14