Strap fixture, To use as a grip belt | Panasonic SDR-S10 guide

Before using

∫About the Card/battery door and the Terminal cover

If dirt, dust or liquids such as water get inside the Card/battery door or the Terminal cover, it may cause the unit to malfunction. Be careful about the following.

≥ Use the unit with the Card/battery door

lock and the Terminal cover lock in the

LOCK position.

≥ When opening the Card/battery door

or the Terminal cover, thoroughly wipe

off any drops of water or dirt on the unit

and open them where water or sand

will not splash onto the unit. Also, wipe

your hands thoroughly if they are wet

before you open the door or the cover.

≥ When closing the Terminal cover, be

sure to insert 1 as shown in the

illustration.

1

≥ If dirt or sand gets inside the Card/

battery door or the Terminal cover,

wipe off the dirt or sand before closing

the door or the cover.

The water resistance (l 9) may be damaged if the water resistant packing (sealing materials) or the exterior is damaged or dented. In this kind of situation, consult the dealer who you purchased this unit from.

Strap fixture

We recommend using the 2-way hand strap (supplied) to prevent the unit from dropping.

Attach the 2-way hand strap 1 to this unit.

1

∫To use as a grip belt.

1Attach the tripod adaptor 2 to the attachment screw for tripod adaptor on this unit.

2

2Pass your hand between the strap and the unit and then pull the length adjustment tab

3.

3

14

VQT1E14

Image 14

Panasonic SDR-S10 About the Card/battery door and the Terminal cover, Strap fixture, To use as a grip belt

Contents

Operating Instructions For United Kingdom Dear Customer Before use Information for your safetyHow to replace the fuse Use only the recommended accessories EMC Electric and magnetic compatibility For the purposes of these operating instructions Indemnity concerning recording contentCarefully observe copyright laws For business users in the European Union VQT1E14 Contents Motion picture playback Still picture playback TroubleshootingSpecifications Editing Water resistance FeaturesBefore using Sales and Support Information For United Kingdom Shock proof Accessories Optional accessories Card slot SD Card l Battery slot Batt lOpen l 14, 19 Before using 16 17 LCD monitor l To use as a grip belt About the Card/battery door and the Terminal coverStrap fixture Attach the 2-way hand strap 1 to this unit Attaching to a tripod Using the LCD monitorAdjust the angle of the LCD monitor as desired To detach from the tripod Capacity SD cardConcerning the cards that can be used on this unit Recording About SD cards that you can use for motion picture recording Handling precautions SD Speed Class Rating Class ¬ Rotate the mode dial to select OFF Power supplyInserting the battery and charging the battery Setup About charging errors When the status indicator is off Connecting to the AC outletTo remove the battery Recordable time Charging time and recordable timeCharging time How to turn on the power Selecting a modeSelecting a mode Turning the unit on/off How to turn off the power To turn off the power How to turn the power on and off with the LCD monitorTo turn on the power Quick start Open the LCD monitor Close the LCD monitor while the mode dial is set to orTo cancel Quick start Inserting/removing an SD card Insert/remove the SD card into/from the card slot Basic operations How to use the cursor buttonCard access lamp Down Left Right Press to select the item Press the cursor button up, left or right to select an item Operations during recordingOperations during playback Press the cursor button up, down, left or right to operate About the operation icons displayed in each mode Video recording mode Setup Video playback mode Setup Picture recording mode Picture playback mode To exit the help mode Switching the languageHelp mode Press the cursor button right to select Using the menu screen While stopped, press the Menu button To exit the menu screen Setting date and timeTo get back to the previous screen For Australia Changing the date and time display styleChanging the display style To cancel Power LCD Adjusting the LCD monitorAdjusting the brightness and colour level Before recording Basic camera positioning About auto mode Recording motion pictures To end the recording Recording time elapsed Screen indications in the video recording modeRecording mode Remaining time left for recording 256 MB 512 MB Recording ≥ Recordable time using the battery l To record still pictures clearly Rotate the mode dial to select Press the record buttonRecording still pictures Recording with a shutter operation effect Screen indications in picture recording modePicture quality for still picture recording Size of still pictures Remaining number of still pictures Digital zoom function ¬ Rotate the mode dial to select Press the zoom buttonZoom in/out function Press the cursor button up to select ª Backlight compensation functionTo use the zoom microphone function To return to normal recording Press the cursor button left to select To cancel fadingFade in/fade out function Start recording. Fade Press the cursor button up to select Colour night view functionTo select the colour for fade in/ out To cancel the soft skin mode Soft skin modeTo cancel the Colour night view function Press the cursor button left to select Ø Self-timer recordingTo stop the timer midway through Recording guideline function Wide modeTo cancel the Recording guideline function Recording images with a 169 aspect ratio To cancel the image stabilizer function Image stabilizer function Wind noise reduction function Scene modeTo cancel the wind noise reduction function To cancel the scene mode function Manual focus adjustment To restore to the automatic adjustment Under incandescent lamps Outdoor modeWhite balance Select and then fill the screen with a white subject To set the white balance manuallyAbout the white balance sensor a Manual shutter speed/ aperture adjustment To restore to automatic adjustment Manual shutter speed adjustment Manual iris/gain adjustment Select the scene to be played back Rotate the mode dial to selectMotion picture playback Press the cursor button in the centre Slow-motion playback About motion picture compatibilityFast forward/rewind playback Playing back motion pictures by date To adjust the volumeFrame-by-frame playback Resuming the previous playback Still picture playback Select the file to be played back About still picture compatibility Deleting scenes one at a time EditingDeleting scenes Deleting multiple scenes from the thumbnail display To complete editing To continue deleting other scenesTo stop halfway through the deletion To complete the settings Locking scenes To cancel all Dpof settings Dpof settingWhat is DPOF? Card management Formatting an SD card With other products With a TVPlayback on TV Start playback on this unit To watch images with a 169 aspect ratio on a regular TVTo display the on-screen information on the TV screen With a DVD recorder Copying dubbing recordings onto a DVD recorder With a VCR Recording dubbing images onto other video devices With a printer PictBridge To stop recording dubbing Connect this unit to a printer When you want to stop printing halfway Select the paper size setting on Paper SizeSelect the layout setting on page Layout Video editing software MotionSD Studio 1.2E With a computer WindowsWhat you can do with a computer Acrobat Reader End User License Agreement Operating environment MotionSD Studio 1.2E Other Disc driveInterface Requirements Microsoft Windows XP Home Edition Click MotionSD Studio 1.2E Installing MotionSDInsert the CD-ROM into the computer Click Next With a computer Connection and recognition procedures Reading the MotionSD Studio operating instructions Connect this unit and a computer If the driver has been recognised properly If the driver has not been recognised properly Example folder structure About the computer displayDrive icons Closing MotionSD Studio Using MotionSDStarting MotionSD Studio Click at the very bottom of Tool BOX Software uninstallation To disconnect the USB cable safely To disconnect USB cable safely With a computer MacintoshCopying still pictures onto the computer Motion picture recording menus MenusMenu list Still picture recording menus Still picture playback menus Play Setup Play Mode l 62 Resume Play l 63 Lock SET lMotion picture playback menus Beep Menus related to SetupOFF Beeps Demo Mode Recording indications IndicationsIndications No.10 Playback indicationsConfirmatory indications Number display Messages Cannot Record About recovery Functions that cannot be used simultaneously 101 TroubleshootingBattery has worn out and can no longer be used 102 103 104 105 106 Cable is 107Others With a computer 108 When carrying the unit, do not drop or bump itAbout this unit Others For Australia Be sure to detach the battery after use About the batteryWhen you are not going to use the unit for an extended time Prepare spare batteries when going out for recording 110 About the AC adaptorAbout the SD card 111 LCD monitorAbout condensation White balance Explanation of termsAutomatic white balance Auto focus Recording a subject behind dirty or dusty window Concerning MPEG2 motion pictures113 Recording a subject in dark surroundings 114 SpecificationsSD Video Camera 115 116 16 MB Number of recordable pictures on an SD card117 32 MB Numerics Index118 119 VQT1E14