Editing
DPOF setting
This is for writing the printing data on an SD card.
You can write the data of the still pictures to be printed and the number of prints (DPOF data) onto the SD card.
¬Rotate the mode dial to select
.
1Press the MENU button, then select [PHOTO SETUP] # [DPOF SET] # [SET] and then press the cursor button in the centre.
2Select the file to be set, then press the cursor button in the centre.
The number of prints set to be in DPOF is displayed.
3Press the cursor button up or down to select the number of prints, then press the cursor button in the centre.
≥You can select from 0 to 999. (The selected number of pictures can be printed with the printer supporting DPOF.)
≥To cancel the setting, set the number of prints to [0].
≥You can also select multiple files in succession.
To complete the settings
Press the MENU button.
To cancel all DPOF settings
Press the MENU button, then select [PHOTO SETUP] # [DPOF SET] # [CANCEL ALL] and then press the cursor button in the centre.
≥When the confirmation message appears, select [YES], then press the cursor button in the centre.
∫What is DPOF?
DPOF stands for Digital Print Order Format. This enables picture printing information to be written onto an SD card so that it can be used on a system supporting DPOF.
≥The DPOF setting can be established for up to 999 files.
≥DPOF setting made on other devices may not be recognised by this unit. Please perform the DPOF settings on this unit.
≥You cannot add the recording date to pictures to be printed with the DPOF settings.
69
