Changing the date and time display style | Panasonic SDR-S10

Setup

≥The 24-hour system is used to display the time.

3Press the cursor button in the centre to enter the selection.

≥The clock function starts at

[00] seconds when the cursor button in the centre is pressed.

≥After pressing the MENU button to finish the setting, check the date and time display.

∫Changing the date and time display style

Press the MENU button, then select [SETUP] # [DATE/TIME] # desired display style and then press the cursor button in the centre.

[DATE][D/T]

15.12.2007		15.12.2007 15:30

[OFF]

∫Changing the display style

Press the MENU button, then select [SETUP] # [DATE FORMAT] # desired display style and press the cursor button in the centre.

Display style	Screen display
[Y/M/D]	2007.12.15

[M/D/Y]	12.15.2007

[D/M/Y]	15.12.2007

≥The date and time function are driven by a built-in lithium battery.

≥Make sure to check the time before recording.

If the time display becomes [- -], the built-in lithium battery has run down. Use the following steps to charge the battery. When you turn on the power for the first time after charging, a message asking you to set the date and time will appear. Select [YES] and set the date and time.

To recharge the built-in lithium battery Connect the AC adaptor or attach the battery to the unit and the built-in lithium battery will be recharged. Leave the unit as it is for approx. 24 hours and the battery will save the date and time for approx. 6 months. (The battery will still be recharged even if the mode dial is set to OFF.)

WARNING

THE LITHIUM BATTERY IN THIS EQUIPMENT MUST ONLY BE REPLACED BY QUALIFIED PERSONNEL. WHEN NECESSARY, CONTACT YOUR LOCAL PANASONIC SUPPLIER.

(For Australia)

WARNING

THE LITHIUM BATTERY IN THIS UNIT MUST ONLY BE REPLACED BY QUALIFIED PERSONNEL. IF THIS IS NECESSARY, CONTACT THE PANASONIC CUSTOMER CARE CENTRE ON 132600 FOR YOUR NEAREST AUTHORIZED SERVICE CENTRE.

35

VQT1E14

Image 35

Panasonic SDR-S10 Changing the date and time display style, Changing the display style, For Australia

Contents

Operating Instructions Dear Customer For United Kingdom Before use Information for your safetyHow to replace the fuse EMC Electric and magnetic compatibility Use only the recommended accessories For business users in the European Union Indemnity concerning recording contentCarefully observe copyright laws For the purposes of these operating instructions VQT1E14 Contents Editing TroubleshootingSpecifications Motion picture playback Still picture playback Water resistance FeaturesBefore using Shock proof Sales and Support Information For United Kingdom Optional accessories Accessories Card slot SD Card l Battery slot Batt lOpen l 14, 19 Before using 16 17 LCD monitor l Attach the 2-way hand strap 1 to this unit About the Card/battery door and the Terminal coverStrap fixture To use as a grip belt To detach from the tripod Using the LCD monitorAdjust the angle of the LCD monitor as desired Attaching to a tripod Recording SD cardConcerning the cards that can be used on this unit Capacity About SD cards that you can use for motion picture recording SD Speed Class Rating Class Handling precautions Setup Power supplyInserting the battery and charging the battery ¬ Rotate the mode dial to select OFF About charging errors When the status indicator is off Connecting to the AC outletTo remove the battery Recordable time Charging time and recordable timeCharging time How to turn off the power Selecting a modeSelecting a mode Turning the unit on/off How to turn on the power Quick start How to turn the power on and off with the LCD monitorTo turn on the power To turn off the power Open the LCD monitor Close the LCD monitor while the mode dial is set to orTo cancel Quick start Insert/remove the SD card into/from the card slot Inserting/removing an SD card Down Left Right Press to select the item How to use the cursor buttonCard access lamp Basic operations Press the cursor button up, down, left or right to operate Operations during recordingOperations during playback Press the cursor button up, left or right to select an item Video recording mode About the operation icons displayed in each mode Setup Video playback mode Picture playback mode Setup Picture recording mode Press the cursor button right to select Switching the languageHelp mode To exit the help mode While stopped, press the Menu button Using the menu screen To exit the menu screen Setting date and timeTo get back to the previous screen For Australia Changing the date and time display styleChanging the display style To cancel Power LCD Adjusting the LCD monitorAdjusting the brightness and colour level Basic camera positioning Before recording About auto mode To end the recording Recording motion pictures Recording time elapsed Screen indications in the video recording modeRecording mode Remaining time left for recording 512 MB 256 MB Recording ≥ Recordable time using the battery l To record still pictures clearly Rotate the mode dial to select Press the record buttonRecording still pictures Size of still pictures Remaining number of still pictures Screen indications in picture recording modePicture quality for still picture recording Recording with a shutter operation effect Digital zoom function ¬ Rotate the mode dial to select Press the zoom buttonZoom in/out function To return to normal recording Backlight compensation functionTo use the zoom microphone function Press the cursor button up to select ª Start recording. Fade To cancel fadingFade in/fade out function Press the cursor button left to select Press the cursor button up to select Colour night view functionTo select the colour for fade in/ out To cancel the soft skin mode Soft skin modeTo cancel the Colour night view function Press the cursor button left to select Ø Self-timer recordingTo stop the timer midway through Recording images with a 169 aspect ratio Wide modeTo cancel the Recording guideline function Recording guideline function Image stabilizer function To cancel the image stabilizer function Wind noise reduction function Scene modeTo cancel the wind noise reduction function To cancel the scene mode function To restore to the automatic adjustment Manual focus adjustment Under incandescent lamps Outdoor modeWhite balance Select and then fill the screen with a white subject To set the white balance manuallyAbout the white balance sensor a To restore to automatic adjustment Manual shutter speed/ aperture adjustment Manual iris/gain adjustment Manual shutter speed adjustment Press the cursor button in the centre Rotate the mode dial to selectMotion picture playback Select the scene to be played back Slow-motion playback About motion picture compatibilityFast forward/rewind playback Playing back motion pictures by date To adjust the volumeFrame-by-frame playback Resuming the previous playback Select the file to be played back Still picture playback About still picture compatibility Deleting multiple scenes from the thumbnail display EditingDeleting scenes Deleting scenes one at a time To complete editing To continue deleting other scenesTo stop halfway through the deletion Locking scenes To complete the settings To cancel all Dpof settings Dpof settingWhat is DPOF? Formatting an SD card Card management With other products With a TVPlayback on TV Start playback on this unit To watch images with a 169 aspect ratio on a regular TVTo display the on-screen information on the TV screen Copying dubbing recordings onto a DVD recorder With a DVD recorder Recording dubbing images onto other video devices With a VCR To stop recording dubbing With a printer PictBridge Connect this unit to a printer When you want to stop printing halfway Select the paper size setting on Paper SizeSelect the layout setting on page Layout Acrobat Reader With a computer WindowsWhat you can do with a computer Video editing software MotionSD Studio 1.2E End User License Agreement MotionSD Studio 1.2E Operating environment Requirements Disc driveInterface Other Microsoft Windows XP Home Edition Click Next Installing MotionSDInsert the CD-ROM into the computer Click MotionSD Studio 1.2E With a computer Reading the MotionSD Studio operating instructions Connection and recognition procedures Connect this unit and a computer If the driver has not been recognised properly If the driver has been recognised properly Example folder structure About the computer displayDrive icons Click at the very bottom of Tool BOX Using MotionSDStarting MotionSD Studio Closing MotionSD Studio To disconnect the USB cable safely Software uninstallation To disconnect USB cable safely With a computer MacintoshCopying still pictures onto the computer Still picture recording menus MenusMenu list Motion picture recording menus Still picture playback menus Play Setup Play Mode l 62 Resume Play l 63 Lock SET lMotion picture playback menus Beeps Menus related to SetupOFF Beep Demo Mode Recording indications IndicationsIndications Number display Playback indicationsConfirmatory indications No.10 Cannot Record Messages About recovery Functions that cannot be used simultaneously 101 TroubleshootingBattery has worn out and can no longer be used 102 103 104 105 106 Cable is 107Others With a computer Others For Australia When carrying the unit, do not drop or bump itAbout this unit 108 Prepare spare batteries when going out for recording About the batteryWhen you are not going to use the unit for an extended time Be sure to detach the battery after use 110 About the AC adaptorAbout the SD card 111 LCD monitorAbout condensation Auto focus Explanation of termsAutomatic white balance White balance Recording a subject in dark surroundings Concerning MPEG2 motion pictures113 Recording a subject behind dirty or dusty window 114 SpecificationsSD Video Camera 115 116 32 MB Number of recordable pictures on an SD card117 16 MB Numerics Index118 119 VQT1E14