Panasonic SV-SR100 operating instructions Other ways of recording

Other ways of recording

There are various settings you can change to record in other ways.

[A]SYNCHRO recording:

To start recording when this unit receives input from other equipment. Recording pauses when input stops.

[B]Recording sensitivity:

Lower the level if the level meter frequently reaches the maximum level when recording from other equipment.

Raise the level if the level meter barely moves.

[C]Track marking:

Choose how to add track marks when recording through a microphone or other equipment.

Changing settings

1.Press [MENU] while in the recording standby mode.

(You can also change these settings while stopped. You cannot change them while recording.)

2.Press [:] or [9] to select “REC MODE?”.

3.Press [ENTER/MEMORY].

4.Press [:] or [9] to select the mode.

[A]Turning SYNCHRO on

(1)Select “LINE SYNCHRO?”.

(2)Press [ENTER/MEMORY].

(3)Press [:] or [9] to select “LINE SYNCHRO ON?”.

[B]Setting recording sensitivity

(1)Select “LINE REC SENS?”.

(2)Press [ENTER/MEMORY].

(3)Press [:] or [9] to select the sensitivity.

Each time you press the button:

REC SENS H?: When recording from

:portable equipment

;

REC SENS L?: When recording from stereo components

[C]Selecting a marking mode

(1)When recording from other equipment Select “LINE MARK MODE?”.

When recording through a microphone Select “MIC MARK MODE?”.

(2)Press [ENTER/MEMORY].

(3)Press [:] or [9] to select the mode. Each time you press the button:

[>AUTO: Track marks added when tracks change.

l: (when recording from other equipment)

l ;

lMANUAL: Add marks manually

l	:	(➡ right)
l	;

{>TIME: Marks are added at 3-, 5-, or 10-minute intervals

5. Press [ENTER/MEMORY].

To stop partway

Press [MENU] before step 5.

Note:

While SYNCHRO recording

≥[REC PAUSE] does not respond to touch.

≥The beginning of the track may not be recorded in some cases. Select “OFF” if this occurs.

∫MANUAL track marking

Press [ENTER/MEMORY] at the place you want to mark. ≥You can still do this even if you didn’t select MANUAL. ≥You cannot add the next track mark until 2 seconds

have passed since adding the last one.

Recording

RQT6457

15