Panasonic SV-SR100 Maintenance, If the surfaces are dirty, Maintaining the lens

Troubleshooting guide

Before requesting service, make the below checks. If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem:

In the U.S.A., contact the Panasonic Customer Call Center at 1-800-211-7262, or e-mail consumerproducts@ panasonic.com, or web site (http://www.panasonic.com/sd).

In Canada, contact Panasonic Canada Inc. Customer Care Centre at 905-624-5505, web site (www.panasonic. ca), or an authorized Servicentre close to you.

In other areas, consult your dealer.

Reference pages are shown as black circled numbers (9).

No operation.	≥The hold function is on. 9
	≥The disc or card isn’t correctly set. 9
	≥The batteries are depleted. If not, try reinserting them.
	≥The AC adaptor isn’t connected fully. 7
	≥The disc or card is scratched or dirty. Replace the disc or card if it is
	scratched.
	≥There is moisture on the disc or card. Wipe dry.
	≥There is moisture on the lens. Wait for about an hour and then try again.
	If the unit malfunctions or freezes during use, disconnect the power
	sources (the AC adaptor or batteries).
	Re-connect the power source and continue operation.
Cannot recharge the batteries.	≥You aren’t using the special rechargeable batteries. 5
Cannot play tracks on an SD	≥Make sure the card has tracks recorded on it. “NO TRACK” appears if the
card.	card is blank.
Play doesn’t start from the first	≥The CD play mode may be set to play tracks randomly. ;
track.	≥The resume function has worked. :
No sound or there is a lot of	≥Raise the volume. :
noise.	≥Ensure the plugs are inserted fully.
	≥Wipe the plugs clean with a soft cloth.
	≥Separate this unit from mobile telephones.
No recording or editing.	≥Release the write-protect switch. 8
	≥Ensure connections to other equipment are correct. >
Titles are cutoff or not	≥The titles exceed the 60-character limit of this unit. @
displayed correctly.	≥This unit cannot display some characters entered with computers and
	other equipment. “∑” is displayed.

Maintenance

If the surfaces are dirty

The surface of the cabinet is polished.

Use the included cloth to clean it.

Never use alcohol, paint thinner or benzine to clean this unit.

Maintaining the lens

Open the lid and clean the lens as shown in the figure. Use a cotton swab to gently wipe off any finger-prints. Recommended product: Lens cleaner kit (SZZP1038C)

Air blower for camera lens

Reference

Lens

RQT6457

21