![](/images/new-backgrounds/1305635/30563517x1.webp)
Attaching the pedestal to TV
■Assembling the pedestal
Be careful not to scratch the surface (part with
gloss finish) of the base during assemblyFrame Remove the cable cover attached to the
frame. (It will be used again after the pedestal is attached to the display Unit.)
Cable cover
Fix securely with assembly screws A . (Total 2 screws)
Tighten screws firmly (tightening torque: 1.8 - 2.0 N• m)
Hole for the base installation | Frame |
| |
| A |
Base
Base
■Set-up
Attach the pedestal to TV
Slide the pedestal frame posts into the brackets on the back of the TV. Fix securely with assembly screws C . (Total 4 screws)
Tighten screws firmly (tightening torque: 1.5 - 1.8 N• m)
Accessories
Assembly screws
A
M8 × 30 (Silver) (2)
B
M4 × 10 (Black) (4)
C
M5 × 25 (Black) (4)
Base (1)
Frame (1)
Holder cover (1)
QuickGuideStart Accessories/Optional Accessory
Pedestal | C |
|
Holder cover
Attach the Holder cover with assembly screws B .
B(Total 4 screws)
Attach the cable cover
Cable cover
Tabs
Insert the tabs of the cable cover into the hole at the back of the pedestal.
Cable
Hole
Place each cable in the groove at the back of the pedestal and snap the cable cover in.
*The lower part of the groove is separated in right and left. Use the one suitable for you.
9