Panasonic TG2382PW Canceling the Handset Registration, Registration HDeregistration

6 Press (3)(3)(5) (DEL.) to delete the registration memory.

•If you make a mistake, press (HOLD/INTERCOM/CLEAR), and enter “335”.

7 Press á (Ok key).

•A beep sounds and the registration memory will be erased on both the handset and the base unit.

•If 3 beeps sound, you entered a wrong code. Enter “335”, then press á (Ok key).

•To register the handset to another base unit of the same model, start from step 5 on page 63.

Canceling Registration/Re-registration

Canceling the Handset Registration

If you no longer need to use the handset or if you need to register the handset to a different base unit of the same model, it may be necessary to cancel the registration.

Only one handset can be canceled at a time near the base unit to which the handset is currently registered.

Make sure the unit is not being used and the handset is lifted off the base unit.

1

2

3

Press (MUTE/FUNCTION).

Scroll to “Initial set” by pressing Ö or Ñ, and press á.

Scroll to “HS register” by pressing Ö or Ñ, and press á.

Date and time HInitial set

--------------

Set answering HHS register

--------------

4Scroll to “Deregistration” by pressing Ö or Ñ.

Registration

HDeregistration

--------------

5Press á.

To deregister press 3,3,5

:--- H=Ok

To deregister press 3,3,5

:335 H=Ok

Handset [1] Deregistered

•You can exit the programming mode any time by pressing (OFF).

•After canceling registration, the handset cannot be used. If you want to use it again, register the handset to the base unit by performing steps 5 and 6 on page 63.

62