Panasonic TG2382PW Battery strength, Recharge, Battery information, Operation Operating time

Battery strength

You can check the battery strength on the handset display. The battery strength is as shown in the chart below.

	Display prompt			Battery strength
				Fully charged
				Medium
				Low
			(flashing)	Needs to be recharged.
Recharge
Recharge the battery when:
—“Recharge” is displayed on the handset,
—“		” flashes on the display, or			Recharge
—the handset beeps intermittently while it is in use.

•If you DO NOT recharge the handset battery for more than 15 minutes, the display

will continually indicate “Recharge” and/or “ ” will flash when the handset is lifted off the base unit or the charger.

•If the battery has been discharged, the handset will display “Charge for 15h” when you place the handset on the base unit or the charger. The handset will not work. Keep charging until fully charged.

Battery information

After your Panasonic battery is fully charged (p. 10):

Operation	Operating time
While in use (TALK)	Up to 4 hours
While not in use (Standby)	Up to 7 days

•The battery operating time may be shortened depending on usage conditions and ambient temperature.

•Clean the charge contacts of the handset, the base unit and the charger with a soft, dry cloth once a month. Clean more often if the unit is subject to grease, dust or high humidity. Otherwise the battery may not charge properly.

•If the battery is fully charged, you do not have to place the handset on the base

unit or the charger until “Recharge” is displayed and/or “ ” flashes. This will maximize the battery life.

•The battery cannot be overcharged.

Preparation

For assistance, please call: 1-800-211-PANA(7262) 11