Panasonic TG2382PW operating instructions Number of Rings, Toll saver

Preparing the Answering System

Number of Rings

You can select the number of times the unit rings before the Answering System answers a call, from “2” to “7” or “Toll saver”*. The Answering System needs to be on. Your phone comes from the factory set to “4”.

Make sure the unit is not being used and the handset is lifted off the base unit.

1

2

3

4

5

6

Press (MUTE/FUNCTION).

Scroll to “Initial set” by pressing Ö or Ñ, and press á.

Scroll to “Set answering” by pressing Ö or Ñ.

Press á.

Press á at “No. of rings”.

•The current setting is displayed.

Select the number of rings by pressing Ö or Ñ.

•You can also select the number of rings by pressing (0) (Toll saver*), or (2) to (7).

Date and time HInitial set

--------------

Set tel line HSet answering HS register

--------------

HNo. of rings Recording time

Number of rings :4

GF H=Save

Number of rings :Toll saver

GF H=Save

7Press á (Save key).

•A beep sounds.

•To exit the programming mode, press (OFF).

•You can exit the programming mode any time by pressing (OFF).

*Toll saver

When you call the unit from outside:

If the unit answers on the 2nd ring, there is at least one new message. If the unit answers on the 4th ring, there are no new messages. Hang up when you hear the 3rd ring. This will save you the toll charge for the call.

24