Panasonic TG2382PW operating instructions If the Following Appear

If the Following Appear...

If the unit detects a problem, one of the following messages will be displayed on the handset. Error beeps or a busy tone will sound.

Display message	Cause & Remedy
Recharge	The battery needs to be charged. Recharge the
	battery (p. 10, 11).
Charge for 15h	The battery has been discharged. The handset
	will not work. Charge the battery fully (p. 10, 11).
No link to base	The handset has lost communication with the
Move closer to	base unit. Move closer to the base unit, and try
base, try again
	again.
Busy	• The called handset/base unit is in use.
	• The handset you are calling is too far from the
	base unit.
	• If the radio communication between the
	handset and the base unit is partially impaired,
	this display will be shown.
	• If more than one unit is in use, such as
	conducting an external/internal call or listening
	to messages, you may not be able to use
	another unit. Try again later.
	• If the Answering System is responding to a call
	or another user is listening to messages in the
	Answering System, you cannot access the
	Answering System. Try again later.
	• You cannot join the conference call. A
	maximum of 2 handsets can take part in a
	conference call.
	• While 2 other handsets are making a
	conference call, you cannot operate the
	handset. Try again later.
Error!!	When you tried to register or deregister the
	handset, the handset and the base unit could not
	link for some reason, such as interference from
	other electrical appliances. Take the handset and
	the base unit away from the electrical appliances
	and try again.

64