Basic Controls
The remote control is not included with this set. Available for purchase separately.
Object model : EUR7636070R
Standby (ON / OFF) button
The Plasma Display must first be plugged into the wall outlet and turned on at the power switch (see page 12). Press ON to turn the Plasma Display On, from Standby mode. Press OFF to turn the Plasma Display Off
to Standby mode.R button (see page 17)
Press the R button to return to previous menu screen.
| ACTION button | Status button |
|
|
| ||
POSITION | Press to make | Press the “Status” button to display the current system status. | |||||
selections. | |||||||
buttons |
|
| 1 | 1 | Input label | ||
|
| PC | |||||
|
|
| |||||
| SOUND button |
| N O R M A L | 2 | 2 | Aspect mode (see page 18) | |
| (see page 24) |
|
| 3 | Off timer | ||
|
|
|
| ||||
|
|
|
|
|
| The off timer indicator is | |
|
| OFF TIMER 90 | 3 |
| displayed only when the off | ||
|
|
|
|
|
| timer has been set. | |
SET UP button (see page 16, 17)
DIRECT INPUT buttons
Press the INPUT “1”, “2”, “3” or “PC” input mode selection button to select the INPUT mode.
This button is used to switch directly to INPUT mode.
These buttons can only display the slot which is installed. If you press the button whose slot is not installed, it automatically displays the current input signal.
Note:
Channel Adjustment
You can use this button when U/V Tuner Board with MATE I/F is installed (optional accessories). Refer to each Board's Operating Instruction for detail.
Volume Adjustment
Press the Volume Up “+” or Down
OFF TIMER button
The Plasma Display can be preset to switch to
30 60 90
0
When three minutes remain, “OFF TIMER 3” will flash.
The off timer is cancelled if a power interruption occurs.
Digital Zoom (see page 25)
Press to access
Digital Zoom.
This displays an enlargement of the designated part of the displayed image.
15
