Options Adjustments
Options |
| 1/3 |
Enable |
| |
Onscreen display | On |
|
Initial INPUT | Off |
|
Initial VOL level | Off | 0 |
Maximum VOL level | Off | 0 |
INPUT lock | Off |
|
Studio W/B | Off |
|
Advanced PIP | Off |
|
Display size | Off |
|
Item | Effect | Adjustments |
Press 
button to adjust the volume when TV is turned on.
|
|
| Off | On | |
Initial VOL |
|
| Off: | Sets normal volume. | |
|
| On: | Sets your preferred volume. | ||
level | Off | On | |||
Notes: |
| ||||
|
|
|
|
•When “Maximum VOL level” is “On”, the volume can only be adjusted between 0 and your maximum range.
•You can hear the changed volume regardless of your volume setting before opening the options menu if you adjust the volume when “Initial VOL level” is “On” and cursor is on the menu.
Press 
button to adjust the maximum volume.
|
|
| Off |
|
| On |
|
|
|
|
|
|
|
| |
|
|
| Off: |
| Sets auto maximum volume. |
|
|
| |||||||
Maximum VOL |
|
| On: |
| Sets your preferred maximum volume. | ||||||||||
|
| Notes: |
|
|
|
|
|
|
|
|
|
| |||
level | Off | On |
|
|
|
|
|
|
|
|
|
| |||
• If the “Maximum VOL level” is set lower than the “Initial VOL level”, the “Initial VOL level” automatically | |||||||||||||||
|
|
| |||||||||||||
|
|
| becomes the same as the “Maximum VOL level”. | ||||||||||||
|
|
| • The volume display can go up to 63 regardless of the settings. | ||||||||||||
|
|
| • You can hear the changed volume regardless of your volume setting before opening the options menu if you | ||||||||||||
|
|
| adjust the volume when “Maximum VOL level” is “On” and cursor is on the menu. | ||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
| Off |
| PC | INPUT1 | INPUT2 | INPUT3 | |||||||
|
|
| Locks the input switch operation. |
|
|
| |||||||||
|
|
| Notes: |
|
|
|
|
|
|
|
|
|
| ||
INPUT lock |
|
| • Only the adjusted signal is displayed (see page 13). | ||||||||||||
|
| • Signal can be displayed when the Terminal board is installed. | |||||||||||||
|
|
| |||||||||||||
|
|
| • Input switch can be used when this is set to “Off”. | ||||||||||||
|
|
| • In two screen display mode, if anything other than “Off” is set, the value will be fixed as the value | ||||||||||||
|
|
| input in the single screen display mode. | ||||||||||||
Studio W/B |
|
| Off: |
| Nullify all the settings adjusted. |
|
|
| |||||||
Off | On | On: |
| Sets the color temperature for TV studio. | |||||||||||
| Note: Valid only when the low is set as color temperature on screen adjustment. | ||||||||||||||
|
|
| |||||||||||||
|
|
| Off: |
| Sets normal two screen display mode (see page 20). | ||||||||||
Advanced PIP |
|
| On: |
| Sets Advanced PIP mode (see page 21). | ||||||||||
Off | On | Notes: |
|
|
|
|
|
|
|
|
|
| |||
|
|
| • When “INPUT lock” is “On”, you cannot use all the two screen display functions. | ||||||||||||
|
|
| • | , |
| buttons are unavailable during Advanced PIP mode operation. | |||||||||
|
|
|
|
|
|
|
|
|
| ||||||
|
|
| Adjusts the image display size on screen. | ||||||||||||
|
|
| Off: |
| Sets the normal image display size on screen. | ||||||||||
|
|
| On: |
| Sets the image display size approximately 95 % of the normal image display. | ||||||||||
|
|
|
|
|
|
| Off |
|
|
| On | ||||
Display size | Off | On | Notes: |
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
| ||||||
|
|
|
|
|
|
|
|
|
|
| |||||
•This setting is valid only when the input signals are as follows; 525i, 525p, 625i, 625p, 750/60p, 750/50p, 1125/60i, 1125/50i, 1125/24sF, 1125/25p, 1125/24p, 1125/30p, 1250/50i (Component Video, RGB, DVI, SDI, HDMI)
•This setting is invalid when two screen display, digital zoom or Multi screen is selected.
•When Display size is set to “On”, Pos. /Size adjustment cannot be used.
•Refer to each board's operating instruction for DVI, SDI, HDMI's corresponding signals.
36
