Power ON / OFF
Connecting the AC cord plug to the Plasma Display.
Fix the AC cord plug securely to the Plasma Display with the clamper. (see page 9)
Connecting the plug to the Wall Outlet
Press the Power switch on the Plasma Display to turn the set on:
Power Indicator: Green
Example: The screen below is displayed for a while after the Plasma Display is turned on. (setting condition is an example.)
Remote Control Sensor
POWER
Power Indicator
Press the
button on the remote control to turn the Plasma Display off.
Power Indicator: Red (standby)
Press the 
button on the remote control to turn the Plasma Display on.
Power Indicator: Green
Turn the power to the Plasma Display off by pressing the 
switch on the unit, when the Plasma Display is on or in standby mode.
Note:
During operation of the power management function, the power indicator turns orange in the power off state.
12
