Panasonic TH-37PG9U, TH-37PR9U, TH-42PG9U, TH-42PR9U manual Advanced PIP, Sub screen, Main screen

Advanced PIP

1

2

3

4

Press to display the Setup menu.

Press to select “OSD Language”.

Press and hold until the Options menu is displayed.

Press to select Advanced PIP.

				Options		1/3
				Off-timer function	Enable
				Onscreen display	On
5	Press to adjust the menu.			Initial INPUT	Off
				Initial VOL level	Off	0
	Off : Sets normal two screen display mode
				Maximum VOL level	Off	0
	(see page 20).			INPUT lock	Off
	On : Sets Advanced PIP mode.			Studio W/B	Off
				Advanced PIP	Off
	Press to confirm.			Display size	Off
	One screen		Advanced PIP
6	Press to exit from
	Options menu.
		Sub screen		Main screen
Notes:
• Advanced PIP corresponding signal
	Sub screen			Main screen
NTSC, PAL, SECAM (tuner, video)		640x480@60Hz, 852x480@60Hz, 1024x768@60Hz,
525i, 525p, 625i, 625p, 750/60p, 750/50p, 1125/60i,		1366x768@60Hz (RGB, DVI, HDMI)
1125/50i, 1250/50i (Component Video, RGB, DVI, SDI,		1280x768@60Hz (DVI)
HDMI)

•Sound output is from the picture which is selected in Audio OUT (PIP) (See page 24).

•In 2 screen display, the same input mode cannot be selected for the main picture and sub picture.

•The main picture and sub picture are processed by different circuits, resulting in a slight difference in the clarity of the pictures. There may also be a difference in the picture quality of the sub picture depending on the type of signals displayed on the main picture and depending on the 2-picture display mode.

•Due to the small dimensions of the sub pictures, these sub pictures cannot be shown in detail.

•Computer screen picture is displayed in a simplified format, and it may not be possible to discern details on them satisfactorily.

•Following combinations of two analog signals cannot be displayed simultaneously.

Component - Component, Component - PC (RGB), PC (RGB) - Component, PC (RGB) - PC (RGB)

•Refer to each board's operating instruction for DVI, SDI, HDMI's corresponding signals.

21