FAQs
Problem | Actions |
•Due to the digital reception technologies involved, quality of the DTV signals may be relatively low in some cases, despite good reception of analogue programmes.
DVB
HDMI
Other
Unable to receive signals with a
Sound is unusual
An error message appears
"Control with HDMI" function does not work
TV goes into "Standby mode"
An error message appears
•Install an aerial individually for the TV and VCR (or use a splitter).
TV
|
|
| (Individual aerial) | ||||
|
|
| Splitter | ||||
| Aerial | Aerial Output |
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
| |
|
|
|
|
|
|
| |
| Input | Aerial Output |
| Aerial Input | |||
VCR | terminal |
|
|
|
|
| |
|
| (Individual aerial) | |||||
|
|
| |||||
•Set the sound setting of the connected equipment to "2ch L.PCM".
•Check(p. 16) the "HDMI1 input" setting in the Sound menu.
•If digital sound connection has a problem, select analogue sound connection. (p. 34)
•Contact the authorized Service Centre.
•Switch the TV on again with the equipment on.
•Set(p. 27)“Control with HDMI” to “Off”, then set to “On” again.
•The sleep function is activated.
•The TV enters "Standby mode" about 30 min. after broadcasting ends.
•Follow the message's instructions.
•If the problem persists, contact the authorized Service Centre.
38
