Advanced
17
•How to Use Menu Functions
(picture, sound quality, etc.)
Adjustments / Confi gurations (alternatives)
Basic picture mode (Dynamic / Normal / Cinema / Auto)
•Set for each input signal
Viewing mode Dynamic
Adjusts colour, brightness, etc. for each picture mode to suit your taste
Contrast
Brightness
Colour
Sharpness
Adjusts tint of image
•For NTSC signal reception only
Tint
Chooses the colour balance of the entire image (Cool / Normal / Warm)
Colour balance Normal
Automatically adjusts colours to vivid ones (Off / On)
Colour management On
Automatically reduces unwanted picture noise (Off / Normal / Dynamic / Auto)
•Not valid on HDMI, PC, and Analogue component signal
P-NR Auto
Automatically reduces noise for watching DTV, DVD and VCD (Off / Min / Mid / Max)
MPEG NR Off
Automatically makes still pictures and slow pictures look more vivid (Off / On)
•For PAL or NTSC signal reception only
•Not valid on RGB, S-Video, components, PC and HDMI
•Cannot be used with DVB
3D-COMB On
Adjusts the output level of deep bass
Bass
Adjusts the output level of high-pitch, shrill sound
Treble
Adjusts volume level of right and left speakers
Balance
Adjusts the volume of the headphones
Headphone volume
Select stereo / monaural (Mono / Stereo)
•Normally: Stereo
•Stereo signal cannot be received: Mono
•M1 / M2: Available while mono signal is transmitted
MPX Stereo
Improves sound quality for music and dramas (Music / Speech)
Mode Music
Gives a greater spatial effect by using dynamic enhancer (Off / On)
Ambience Off
Chooses according to the signal when HDMI is connected
(Auto / Digital / Analogue) (p. 34)
•HDMI2 terminal is for digital signal only
HDMI1 input Auto
Chooses the connector to which a Q-Link compatible equipment is connected
(Off / AV2 / AV3) (p. 30)
Q-Link AV2
Chooses the signal to be transmitted from the TV to Q-Link
(Analogue / DVB / AV1 / AV2 / AV3 / AV4 / Monitor)
•Monitor: Image displayed on screen
•Component, PC and HDMI signals cannot be outputted
AV2 out Monitor
Control with HDMI function (Off / On) (p. 27)
Control with HDMI On
Teletext display mode (TOP (FLOF) / List) (p. 12)
Teletext TOP
Sets the time the TV automatically turns Off. (Off / 15 / 30 / 45 / 60 / 75 / 90) (minutes)
Off timer Off
Selects teletext language (Analogue) (West / East1 / East2)
•West: English, French, German, Greek, Italian, Spanish, Swedish, Turkish
•East1: Czech, English, Estonian, Lettish, Rumanian, Russian, Ukrainian
•East2: Czech, Hungarian, Lettish, Polish, Rumanian
Text language West
Increases the brightness of the side panel (Off / Low / Mid / High)
•The recommended setting is High to prevent panel "after-image"
Side panel Off
Reduces brightness of picture to economise on power consumption (Off / On)
Power save Off
Edits channels (p. 20)
Programme edit
Access
Sets channels automatically (p. 20) Access
Auto setup
Sets channels manually (p. 20) Manual tuning Access
Fine tuning of channels (during rain, etc.)
Fine tuning
Selects optional colour system depending on video signals
(Auto / PAL / SECAM / M.NTSC)
Colour system Auto
Adjusts volume of individual stations
Volume correction
Set “On” when the decoder is connected to AV2 or AV3 terminal via a Q-Link equipment
(Off / On)
Decoder (AV2) Off
Edits or setups DVB channels (p. 18)
DVB Setup Menu Access
Changes language for on-screen displays
System language Access
Resets all settings, for example, when moving (p. 32)
Shipping condition Access
Selects optional colour system based on video signals in AV mode
Colour system Auto
Adjusts volume for AV, PC, and HDMI mode
Volume correction
•A different menu will be displayed while PC is used. (p. 25)
•In AV mode, the Sound menu and Setup menu give a smaller number of options.
•Cannot be used with DVB