Printing Problems, Combining Originals Mode | Lanier JP1030, LDD030

Printing Problems

Printing Problems

Problem		Cause		Action

When you try to set several		Some functions cannot be		⇒ p.105 “Combination Chart”
functions at a time, you can-		used together.
not set some functions.

Parts of the image are not		Erase margin is too wide.		Set a narrower erase margin
printed in Edge Erase mode.				with the service program. ⇒
printed in Edge Erase mode.		Edge margins of original are		with the service program. ⇒
		Edge margins of original are		p.57 “User Tools Menu”
		too narrow.		p.57 “User Tools Menu”
		too narrow.

Prints are blank or parts of the		The paper feed side plates are		Make sure that the paper feed
image are not printed.		not set correctly.		side plates touch the paper
				lightly.

2nd printing with another		The 1st print image is still wet.		Wait until the 1st image be-
drum is unsatisfactory.				comes dry.

An uneven solid image ap-		Large solid image wrinkles		Increase the print speed or se-
pears.		the master.		lect photo mode.		5

Combining Originals Mode


Problem		Cause		Action

Prints are blank or parts of the		Original size and direction are		You cannot use originals of
image are not printed.		not correct.		different sizes and directions
				in Combining Originals
				mode. Use originals of same
				size and direction.

Print image is not correct.		Original set order is not cor-		Place originals face up into the
		rect.		optional document feeder.
				The first original should be on
				the top.

				Place original face down on
				the exposure glass. The first
				original should be set first.

73

Image 85

Lanier JP1030, LDD030 manual Printing Problems, Combining Originals Mode

Contents

LDD Page Introduction Means Power ON. b means Power OFF Safety During Operation Safety InformationPage Symbols How to Read this Manual What You Can Do with this Machine Memory Mode Class ModeSecurity Mode Combining Originals Table of Contents User Tools 103 101105 107 Machine Exterior Machine Interior Document feeder OptionsExposure glass cover Operation Panel Check IndicatorKeys Keys Scroll keys Number keys V keys Speed keys Indicators Print Paper Operation Operation Originals Carefully open the paper feed tray Preparation for Printing Lower the paper alignment wings Setting Up the Paper Delivery TrayLift the paper alignment wings Turn on the main switch Enter the number of prints with the number keys Standard Printing Press the Start key When Auto Cycle is off Press the Print key Restoring Paper Feed and Paper Delivery Trays Turn off the main switch Close the paper feed trayRemove the paper from the paper feed tray Energy Saver Mode Forward or Backward Adjusting the Print Image PositionForward or Backward Right or Left Right or Left Adjust the paper delivery sideShifting the image to the right Shifting the image to the left Before Making a Master Adjusting the Print Image DensityAfter Making a Master Before Making a Master Tint Mode Fine Mode Changing the Printing Speed Completed Prints Stopping a Multi-print RunPrints Entered and Check Metric version Preset Reduce/EnlargeInch version Operation Zoom When not using Edge Erase mode Using Edge Erase modeEdge Erase Press the Edge Erase key Edge Erase Pressure Lever Position Printing on Thick or Thin Paper Letter/Photo mode Letter modePhoto mode Selecting Original Type Operation Economy Mode Class Mode Off Repeat steps B and C for each original Memory Mode Place the first original face down on the exposure glass Press the q key again Repeat this step until you have finished printing Combining Originals First original will be printed on the left side of the paper Press the Skip Feed key Skip Feed Printing Program Storing Your SettingsRecalling a Program Program Security Mode Originals Optional Document Feeder Placing Originals Document Feeder Combining Originals Using the Document Feeder Memory Mode Using Insert originals face up in the doc- ument feeder Making Color Prints Color Printing Using the Optional Color DrumChanging the Color Drum Unit Pull out the drum unit handle Printing in Two Colors Place the second original, and then press the Start key Optional Functions Er key Accessing the User Tools User Tools User Tools Menu Mode Function Default Letter mode User Tools Menu User Tools Mode Function User Tools Replenishing Paper Loading Paper on the Paper Feed Tray Changing the Paper Size Open the front door Pull out the ink holder When the Add Ink Indicator j Lights Replenishing Supplies Close the front door Pull out the master tray Open the plotter cover Master Roll ReplacementSet the paper edge of the master roll as shown Close the plotter cover Push in the master tray Placing a New Roll of Tape in the Tape Dispenser Option Turn on the power switch of the tape dispenserOpen the cover of the tape dis- penser As shown, put the roll in the dis- penser Machine Operation Problems Troubleshooting When the supply/exchange indicators light When the open cover/unit indicator M lightsWhen other indicators light Combining Originals Mode Printing Problems Clearing Misfeeds Open the document feeder cover When x and P lightPull out the original gently Return the document feed sheet to its original position Close the document feeder cover until it clicks in position To prevent original misfeeds When x and B light When x and a lightSlowly but firmly pull out the paper When x and C light To prevent paper misfeeds GRLEAD0E When x and D light Pull out the master eject box When x and E light Return the master eject box to its original position Remove the misfed master Troubleshooting Front door When the Open Cover/Unit Indicator M LightsMand P Document feeder Option Mand D Master tray Mand M Drum unit Mand E Master eject box Pull out the master eject box and remove the used masters When the Master Eject Indicator k Lights When Other Indicators Light Reduce the printing speed by pressing the W key When the Prints are Thrown Over the Paper Delivery Tray Poor Printing Turn off the main switchDirt on the Back Side of Paper Pull out the drum unit Poor Printing White Prints or Incomplete Prints Dirt on the Front Side of Paper Black Line/Stain Reference Troubleshooting General Cautions Operation Notes Remarks Print Paper 100 Environmental Conditions Where to Put the MachineOptimum environmental conditions Environments to avoid Access to Machine Power ConnectionMain Frame More than 10 cm More than 60 cm Main Frame Maintaining the MachineExposure Glass Paper Feed Roller paper feed tray Optional Document Feeder Cleaning the Sheet Combination Chart 106 Main Frame Image Position Adjustment Print Paper WeightDimensions W ⋅ D ⋅ H Leading Edge Margin Power Source WeightPower Consumption Noise Emission *1 Document Feeder Option Original WeightOriginal Capacity Name Size Remarks Consumables Index 113 114 Memo Customer Vision Our commitment to your Complete satisfaction