Optional Document Feeder, Originals | Lanier JP1030, LDD030 specification

2. Optional Functions

Optional Document Feeder

Insert a stack of originals in the docu- ment feeder. They will be fed auto- matically.

Originals

Placing the following originals in the document feeder might cause mis- feeds or damage to the originals.

Place the following kinds of originals on the exposure glass:

•Originals heavier than 127.9g/m2, 34 lb

•Originals lighter than 52.3g/m2, 14 lb

•Originals smaller than 148mm ⋅ 210mm, 5.9" ⋅ 8.3"

•Originals larger than 297mm ⋅ 864mm, 11.6" ⋅ 34.0"

•Stapled or clipped originals

•Perforated or torn originals

•Curled, folded, or creased origi- nals

•Originals with any kind of coating, such as thermal fax paper, art pa- per, aluminum foil, carbon paper, or conductive paper

•Bound originals such as books

•Damaged originals

•Originals with glue on them

•Pasted originals

•Originals written in pencil

•Thin originals that are a little stiff

•Originals with index tabs

•Transparent originals such as OHP transparencies or translucent pa- per

The following original sizes placed in the document feeder can be detected.

Metric version	A3 L, B4 L, A4 KL,
	B5 KL, A5KL

Inch version	11" ⋅ 17" L, 81/2" ⋅ 14"
	L, 81/2" ⋅ 11"KL, 51/2"
	⋅ 81/2"KL

Note

❒Place originals after correction flu- id and ink have completely dried. Not taking this precaution could mark the exposure glass and cause marks to be printed.

For standard printing functions, set originals as shown below.

R

R

GRSETT1E

You cannot place originals of differ- ent sizes at the same time.

When you use thin originals, place one original at a time in the document feeder or place them on the exposure glass.

The first 5mm, 0.2", of the leading edge and the last 2mm, 0.08" of the trailing edge cannot be printed. Make sure the leading edge margin is at least 5mm, 0.2", and the trailing edge margin is at least 2mm, 0.08".

Do not stack originals above the limit mark.

45

Image 57

Lanier JP1030, LDD030 manual Optional Document Feeder, Originals

Contents

LDD Page Introduction Means Power ON. b means Power OFF Safety During Operation Safety InformationPage Symbols How to Read this Manual What You Can Do with this Machine Memory Mode Class ModeSecurity Mode Combining Originals Table of Contents User Tools 103 101105 107 Machine Exterior Machine Interior Options Document feederExposure glass cover Operation Panel Check IndicatorKeys Keys Scroll keys Number keys V keys Speed keys Indicators Print Paper Operation Operation Originals Carefully open the paper feed tray Preparation for Printing Setting Up the Paper Delivery Tray Lower the paper alignment wingsLift the paper alignment wings Turn on the main switch Enter the number of prints with the number keys Standard Printing Press the Start key When Auto Cycle is off Press the Print key Turn off the main switch Close the paper feed tray Restoring Paper Feed and Paper Delivery TraysRemove the paper from the paper feed tray Energy Saver Mode Forward or Backward Adjusting the Print Image PositionForward or Backward Right or Left Right or Left Adjust the paper delivery sideShifting the image to the right Shifting the image to the left Before Making a Master Adjusting the Print Image DensityAfter Making a Master Before Making a Master Tint Mode Fine Mode Changing the Printing Speed Stopping a Multi-print Run Completed PrintsPrints Entered and Check Preset Reduce/Enlarge Metric versionInch version Operation Zoom When not using Edge Erase mode Using Edge Erase modeEdge Erase Press the Edge Erase key Edge Erase Pressure Lever Position Printing on Thick or Thin Paper Letter/Photo mode Letter modePhoto mode Selecting Original Type Operation Economy Mode Class Mode Off Repeat steps B and C for each original Memory Mode Place the first original face down on the exposure glass Press the q key again Repeat this step until you have finished printing Combining Originals First original will be printed on the left side of the paper Press the Skip Feed key Skip Feed Printing Storing Your Settings ProgramRecalling a Program Program Security Mode Originals Optional Document Feeder Placing Originals Document Feeder Combining Originals Using the Document Feeder Memory Mode Using Insert originals face up in the doc- ument feeder Color Printing Using the Optional Color Drum Making Color PrintsChanging the Color Drum Unit Pull out the drum unit handle Printing in Two Colors Place the second original, and then press the Start key Optional Functions Er key Accessing the User Tools User Tools User Tools Menu Mode Function Default Letter mode User Tools Menu User Tools Mode Function User Tools Replenishing Paper Loading Paper on the Paper Feed Tray Changing the Paper Size Open the front door Pull out the ink holder When the Add Ink Indicator j Lights Replenishing Supplies Close the front door Master Roll Replacement Pull out the master tray Open the plotter coverSet the paper edge of the master roll as shown Close the plotter cover Push in the master tray Placing a New Roll of Tape in the Tape Dispenser Option Turn on the power switch of the tape dispenserOpen the cover of the tape dis- penser As shown, put the roll in the dis- penser Machine Operation Problems Troubleshooting When the open cover/unit indicator M lights When the supply/exchange indicators lightWhen other indicators light Combining Originals Mode Printing Problems Clearing Misfeeds Open the document feeder cover When x and P lightPull out the original gently Return the document feed sheet to its original position Close the document feeder cover until it clicks in position To prevent original misfeeds When x and a light When x and B lightSlowly but firmly pull out the paper When x and C light To prevent paper misfeeds GRLEAD0E When x and D light Pull out the master eject box When x and E light Return the master eject box to its original position Remove the misfed master Troubleshooting When the Open Cover/Unit Indicator M Lights Front doorMand P Document feeder Option Mand D Master tray Mand M Drum unit Mand E Master eject box Pull out the master eject box and remove the used masters When the Master Eject Indicator k Lights When Other Indicators Light Reduce the printing speed by pressing the W key When the Prints are Thrown Over the Paper Delivery Tray Turn off the main switch Poor PrintingDirt on the Back Side of Paper Pull out the drum unit Poor Printing White Prints or Incomplete Prints Dirt on the Front Side of Paper Black Line/Stain Reference Troubleshooting General Cautions Operation Notes Remarks Print Paper 100 Environmental Conditions Where to Put the MachineOptimum environmental conditions Environments to avoid Access to Machine Power ConnectionMain Frame More than 10 cm More than 60 cm Main Frame Maintaining the MachineExposure Glass Paper Feed Roller paper feed tray Optional Document Feeder Cleaning the Sheet Combination Chart 106 Main Frame Image Position Adjustment Print Paper WeightDimensions W ⋅ D ⋅ H Leading Edge Margin Power Source WeightPower Consumption Noise Emission *1 Original Weight Document Feeder OptionOriginal Capacity Name Size Remarks Consumables Index 113 114 Memo Customer Vision Our commitment to your Complete satisfaction