How to Read this Manual, Symbols | Lanier JP1030, LDD030 specification

How to Read this Manual

Symbols

In this manual, the following symbols are used:

RWARNING:

This symbol indicates a potentially hazardous situation that might result in death or serious injury when you misuse the machine without following the in- structions under this symbol. Be sure to read the instructions, all of which are de- scribed in the Safety Information section.

RCAUTION:

This symbol indicates a potentially hazardous situation that might result in mi- nor or moderate injury or property damage that does not involve personal injury when you misuse the machine without following the instructions under this symbol. Be sure to read the instructions, all of which are described in the Safety Information section.

* The statements above are notes for your safety.

Important

If this instruction is not followed, paper might be misfed, originals might be damaged, or data might be lost. Be sure to read this.

Preparation

This symbol indicates the prior knowledge or preparations required before op- erating.

Note

This symbol indicates precautions for operation, or actions to take after misop- eration.

Limitation

This symbol indicates numerical limits, functions that cannot be used together, or conditions in which a particular function cannot be used.

Reference

This symbol indicates a reference.

{}

Keys built into the machine's operation panel.

iii

Image 7

Lanier JP1030, LDD030 manual How to Read this Manual, Symbols

Contents

LDD Page Introduction Means Power ON. b means Power OFF Safety During Operation Safety InformationPage Symbols How to Read this Manual What You Can Do with this Machine Combining Originals Class ModeMemory Mode Security Mode Table of Contents User Tools 107 101103 105 Machine Exterior Machine Interior Document feeder OptionsExposure glass cover Keys Scroll keys Check IndicatorOperation Panel Keys Number keys V keys Speed keys Indicators Print Paper Operation Operation Originals Carefully open the paper feed tray Preparation for Printing Lower the paper alignment wings Setting Up the Paper Delivery TrayLift the paper alignment wings Turn on the main switch Enter the number of prints with the number keys Standard Printing Press the Start key When Auto Cycle is off Press the Print key Restoring Paper Feed and Paper Delivery Trays Turn off the main switch Close the paper feed trayRemove the paper from the paper feed tray Energy Saver Mode Right or Left Adjusting the Print Image PositionForward or Backward Forward or Backward Shifting the image to the left Adjust the paper delivery sideRight or Left Shifting the image to the right Before Making a Master Adjusting the Print Image DensityBefore Making a Master After Making a Master Tint Mode Fine Mode Changing the Printing Speed Completed Prints Stopping a Multi-print RunPrints Entered and Check Metric version Preset Reduce/EnlargeInch version Operation Zoom Press the Edge Erase key Using Edge Erase modeWhen not using Edge Erase mode Edge Erase Edge Erase Pressure Lever Position Printing on Thick or Thin Paper Selecting Original Type Letter modeLetter/Photo mode Photo mode Operation Economy Mode Class Mode Off Repeat steps B and C for each original Memory Mode Place the first original face down on the exposure glass Press the q key again Repeat this step until you have finished printing Combining Originals First original will be printed on the left side of the paper Press the Skip Feed key Skip Feed Printing Program Storing Your SettingsRecalling a Program Program Security Mode Originals Optional Document Feeder Placing Originals Document Feeder Combining Originals Using the Document Feeder Memory Mode Using Insert originals face up in the doc- ument feeder Making Color Prints Color Printing Using the Optional Color DrumChanging the Color Drum Unit Pull out the drum unit handle Printing in Two Colors Place the second original, and then press the Start key Optional Functions Er key Accessing the User Tools User Tools User Tools Menu Mode Function Default Letter mode User Tools Menu User Tools Mode Function User Tools Replenishing Paper Loading Paper on the Paper Feed Tray Changing the Paper Size Open the front door Pull out the ink holder When the Add Ink Indicator j Lights Replenishing Supplies Close the front door Pull out the master tray Open the plotter cover Master Roll ReplacementSet the paper edge of the master roll as shown Close the plotter cover Push in the master tray As shown, put the roll in the dis- penser Turn on the power switch of the tape dispenserPlacing a New Roll of Tape in the Tape Dispenser Option Open the cover of the tape dis- penser Machine Operation Problems Troubleshooting When the supply/exchange indicators light When the open cover/unit indicator M lightsWhen other indicators light Combining Originals Mode Printing Problems Clearing Misfeeds Return the document feed sheet to its original position When x and P lightOpen the document feeder cover Pull out the original gently Close the document feeder cover until it clicks in position To prevent original misfeeds When x and B light When x and a lightSlowly but firmly pull out the paper When x and C light To prevent paper misfeeds GRLEAD0E When x and D light Pull out the master eject box When x and E light Return the master eject box to its original position Remove the misfed master Troubleshooting Front door When the Open Cover/Unit Indicator M LightsMand P Document feeder Option Mand D Master tray Mand M Drum unit Mand E Master eject box Pull out the master eject box and remove the used masters When the Master Eject Indicator k Lights When Other Indicators Light Reduce the printing speed by pressing the W key When the Prints are Thrown Over the Paper Delivery Tray Poor Printing Turn off the main switchDirt on the Back Side of Paper Pull out the drum unit Poor Printing White Prints or Incomplete Prints Dirt on the Front Side of Paper Black Line/Stain Reference Troubleshooting General Cautions Operation Notes Remarks Print Paper 100 Environments to avoid Where to Put the MachineEnvironmental Conditions Optimum environmental conditions More than 10 cm More than 60 cm Power ConnectionAccess to Machine Main Frame Paper Feed Roller paper feed tray Maintaining the MachineMain Frame Exposure Glass Optional Document Feeder Cleaning the Sheet Combination Chart 106 Main Frame Leading Edge Margin Print Paper WeightImage Position Adjustment Dimensions W ⋅ D ⋅ H Noise Emission *1 WeightPower Source Power Consumption Document Feeder Option Original WeightOriginal Capacity Name Size Remarks Consumables Index 113 114 Memo Customer Vision Our commitment to your Complete satisfaction