
Skip Feed Printing
Skip Feed Printing
If the backs of prints are dirty, you can increase the time between prints using the {Skip Feed} key. When one sheet of paper is fed, the drum rotates twice. This gives you the chance to re- move prints one by one from the pa- per delivery tray or insert one sheet of paper between two prints.
Note
❒You can select how many times the drum rotates with the user tools. See “22. Skip Feed Number” on p.57 “User Tools Menu”.
A Press the {Skip Feed} key.
Note
❒You can temporarily change the
default value. While holding down the {Skip Feed} key, press the number of the drum rota- tions from 2 to 9 with the num- ber keys.
B Place your originals on the expo- sure glass or in the optional docu- ment feeder.
C Enter the number of prints with | 1 |
the number keys. |
D Press the {Start} key.
Printing starts automatically after trial print is delivered.
Note
❒If you want to check the print image, press the {Auto Cycle}
key to turn off Auto Cycle mode before pressing the {Start} key. For details, see p.14 “When Auto Cycle is off”.
41