Lanier JP1030, LDD030 manual User Tools Menu, Mode Function

User Tools Menu

User Tools Menu

No.	Mode	Function
1	Resettable Master	The total number of masters is displayed. To clear it, hold
	Count	down the {Clear/Stop} key for at least 3 seconds.
2	Resettable Print Count	The total number of prints is displayed. To clear it, hold
		down the {Clear/Stop} key for at least 3 seconds.
3	Auto Reset	The machine returns to its initial condition automatically
		after the job is finished. The automatic reset time can be set
		from 1 to 5 minutes or no.

		Note
		❒ Default: no
		❒ Adjustment value:
		• 0: no
		• 1 – 5 minutes
4	Auto Energy Saving	You can set the time until the Energy Saver mode starts.

		Note
		❒ Default: 3 minutes
		❒ Adjustment value:
		• 0: oFF
		• 1 – 120 minutes
5	Minimum Print Quan-	You can set the minimum number of prints with the num-
	tity	ber keys.

		Note
		❒ Default: 0
		❒ Adjustment value: 0 – 9999
6	Maximum Print	You can set the maximum number of prints with the num-
	Quantity	ber keys.

	Note
	❒ Default: 9999
	❒ Adjustment value: 0 – 9999
7	Copy Count Display The counter can be set to show the number of prints made
	(Up), or the number of prints left to be made (Down).

Note

❒Default: oFF (Down)

❒Adjustment value:

•0: oFF (Down)

•1: on (Up)

3

57