Safety Information, Safety During Operation | Lanier JP1030, LDD030

Safety Information

When using this machine, the following safety precautions should always be fol- lowed.

Safety During Operation

In this manual, the following important symbols are used:

RWARNING:

Indicates a potentially hazardous situation which, if instructions are not followed, could result in death or serious injury.

RCAUTION:

Indicates a potentially hazardous situation which, if instructions are not followed, may result in minor or moderate injury or damage to property.

Safety During Operation

In this manual, the following important symbols are used:

RWARNING:

Indicates a potentially hazardous situation which, if instructions are not followed, could result in death or serious injury.

RCAUTION:

Indicates a potentially hazardous situation which, if instructions are not followed, may result in minor or moderate injury or damage to property.

RWARNING:

•Connect the power cord directly into a wall outlet and never use an ex- tension cord.

•Disconnect the power plug (by pulling the plug, not the cable) if the power cable or plug becomes frayed or otherwise damaged.

•To avoid hazardous electric shock, do not remove any covers or screws other than those specified in this manual.

•Turn off the power and disconnect the power plug (by pulling the plug, not the cable) if any of the following occurs:

•You spill something into the machine.

•You suspect that your machine needs service or repair.

•The external housing of your machine has been damaged.

i

Image 5

Lanier JP1030, LDD030 manual Safety Information, Safety During Operation

Contents

LDD Page Introduction Means Power ON. b means Power OFF Safety During Operation Safety InformationPage Symbols How to Read this Manual What You Can Do with this Machine Memory Mode Class ModeSecurity Mode Combining Originals Table of Contents User Tools 103 101105 107 Machine Exterior Machine Interior Exposure glass cover OptionsDocument feeder Operation Panel Check IndicatorKeys Keys Scroll keys Number keys V keys Speed keys Indicators Print Paper Operation Operation Originals Carefully open the paper feed tray Preparation for Printing Lift the paper alignment wings Setting Up the Paper Delivery TrayLower the paper alignment wings Turn on the main switch Enter the number of prints with the number keys Standard Printing Press the Start key When Auto Cycle is off Press the Print key Remove the paper from the paper feed tray Turn off the main switch Close the paper feed trayRestoring Paper Feed and Paper Delivery Trays Energy Saver Mode Forward or Backward Adjusting the Print Image PositionForward or Backward Right or Left Right or Left Adjust the paper delivery sideShifting the image to the right Shifting the image to the left Before Making a Master Adjusting the Print Image DensityAfter Making a Master Before Making a Master Tint Mode Fine Mode Changing the Printing Speed Prints Entered and Check Stopping a Multi-print RunCompleted Prints Inch version Preset Reduce/EnlargeMetric version Operation Zoom When not using Edge Erase mode Using Edge Erase modeEdge Erase Press the Edge Erase key Edge Erase Pressure Lever Position Printing on Thick or Thin Paper Letter/Photo mode Letter modePhoto mode Selecting Original Type Operation Economy Mode Class Mode Off Repeat steps B and C for each original Memory Mode Place the first original face down on the exposure glass Press the q key again Repeat this step until you have finished printing Combining Originals First original will be printed on the left side of the paper Press the Skip Feed key Skip Feed Printing Recalling a Program Storing Your SettingsProgram Program Security Mode Originals Optional Document Feeder Placing Originals Document Feeder Combining Originals Using the Document Feeder Memory Mode Using Insert originals face up in the doc- ument feeder Changing the Color Drum Unit Color Printing Using the Optional Color DrumMaking Color Prints Pull out the drum unit handle Printing in Two Colors Place the second original, and then press the Start key Optional Functions Er key Accessing the User Tools User Tools User Tools Menu Mode Function Default Letter mode User Tools Menu User Tools Mode Function User Tools Replenishing Paper Loading Paper on the Paper Feed Tray Changing the Paper Size Open the front door Pull out the ink holder When the Add Ink Indicator j Lights Replenishing Supplies Close the front door Set the paper edge of the master roll as shown Master Roll ReplacementPull out the master tray Open the plotter cover Close the plotter cover Push in the master tray Placing a New Roll of Tape in the Tape Dispenser Option Turn on the power switch of the tape dispenserOpen the cover of the tape dis- penser As shown, put the roll in the dis- penser Machine Operation Problems Troubleshooting When other indicators light When the open cover/unit indicator M lightsWhen the supply/exchange indicators light Combining Originals Mode Printing Problems Clearing Misfeeds Open the document feeder cover When x and P lightPull out the original gently Return the document feed sheet to its original position Close the document feeder cover until it clicks in position To prevent original misfeeds Slowly but firmly pull out the paper When x and a lightWhen x and B light When x and C light To prevent paper misfeeds GRLEAD0E When x and D light Pull out the master eject box When x and E light Return the master eject box to its original position Remove the misfed master Troubleshooting Mand P Document feeder Option When the Open Cover/Unit Indicator M LightsFront door Mand D Master tray Mand M Drum unit Mand E Master eject box Pull out the master eject box and remove the used masters When the Master Eject Indicator k Lights When Other Indicators Light Reduce the printing speed by pressing the W key When the Prints are Thrown Over the Paper Delivery Tray Dirt on the Back Side of Paper Turn off the main switchPoor Printing Pull out the drum unit Poor Printing White Prints or Incomplete Prints Dirt on the Front Side of Paper Black Line/Stain Reference Troubleshooting General Cautions Operation Notes Remarks Print Paper 100 Environmental Conditions Where to Put the MachineOptimum environmental conditions Environments to avoid Access to Machine Power ConnectionMain Frame More than 10 cm More than 60 cm Main Frame Maintaining the MachineExposure Glass Paper Feed Roller paper feed tray Optional Document Feeder Cleaning the Sheet Combination Chart 106 Main Frame Image Position Adjustment Print Paper WeightDimensions W ⋅ D ⋅ H Leading Edge Margin Power Source WeightPower Consumption Noise Emission *1 Original Capacity Original WeightDocument Feeder Option Name Size Remarks Consumables Index 113 114 Memo Customer Vision Our commitment to your Complete satisfaction