Korg Electric Keyboard manual 225, Sequencer mode, Global Midi channel

Sequencer mode

When one of the TRITON Le’s controllers is operated, its effect will apply to the track 1–16 that is selected by “Track Select” (SEQ 1.1–1c).

If the “Status” (SEQ 3.1–1a/2a) of the track selected by “Track Select” is EXT, EX2, or BTH, a control change mes- sage will be transmitted on the MIDI channel specified by “MIDI Channel” (SEQ 3.1–1a/2a).

If the “Status” is INT or BTH, operating one of the TRITON Le’s controllers will affect only that track. Simulta- neously, the same effect will also apply to any track with the same “MIDI Channel” setting.

In the case of Master Volume, the universal exclusive message Master Volume will be transmitted.

You can make settings for MIDI Filter (SEQ 4.1–4.4) to enable or disable control changes and controllers for each track. When checked, the operations effective for a “Status” of INT or BTH will be enabled. Tracks whose “Status” is EXT, EX2, or BTH will transmit control changes regardless of this setting.

Effect dynamic modulation can be controlled when the “Control Ch (Control Channel)” (SEQ 7.1–1b, 7.2–1a, 7.2–1c) setting for IFX, MFX1, 2, or MEQ matches the MIDI channel of the track selected by “Track Select.” (In the case of All Rt., control is possible on the MIDI channel of all routed tracks.) If one of the TRITON Le’s controllers is operated during realtime recording, the corresponding or assigned control change will be recorded.

Sampling mode

When one of the TRITON Le’s controllers is operated, a con- trol change message will be transmitted on the global MIDI channel (“MIDI Channel” GLOBAL 2.1–1a).

In the case of Master Volume, the universal exclusive message Master Volume will be transmitted.

It is not possible to make AMS settings in Sampling mode.

*Global MIDI channel:

GLOBAL 2.1: MIDI “MIDI Channel” (2.1–1a)

Appendices

225