Korg Electric Keyboard manual 146, Loading Aiff files and Wave files

23) Load .KMP: selected icon

The selected .KMP file will be loaded as a multisample. The

.KSF files used by the .KMP will also be loaded as samples.

The .KSF files used by the .KMP file will be saved in an identically-named directory that is created auto- matically when the .KMP file is created.

1To load the data, press the [F8] (“OK”) key. To cancel without loading, press the [F7] (“Cancel”) key.

The data will be loaded into the numbers that follow the last multisample or sample number currently existing in sample data RAM (i.e., that were previously sampled or loaded). In this case, only the valid multisamples and samples will be loaded (Append load).

If a .KSF file used by the .KMP file is not found in the cur- rent directory or lower, a dialog box will appear, asking you to specify the directory. Use the procedure described in “When a file to be loaded cannot be found...” (☞ p.141) to load the required .KSF file.

Since overflow checking of sample data RAM is per- formed when loading each individual .KSF file, it is possible that an overflow may occur in the middle of the loading process.

You can load multiple files within the directory. (☞ p.145)

24) Load .KSF: selected icon

The selected .KSF file will be loaded as a sample.

1To load the data, press the [F8] (“OK”) key. To cancel without loading, press the [F7] (“Cancel”) key.

The data will be loaded into the numbers that follow the last sample number currently existing in sample data RAM (i.e., that were previously sampled or loaded) (Append load).

You can load multiple files within the directory. (☞ p.145)

Loading AIFF files and WAVE files

If the EXB-SMPL option (sold separately) and sample data RAM are installed in the TRITON Le, you can load AIFF for- mat or WAVE format files containing audio data that was saved on your computer. The loaded data can be used as samples or drum samples.

25) Load .AIF: selected icon

The selected AIFF file will be loaded as a sample.

1To load the data, press the [F8] (“OK”) key. To cancel without loading, press the [F7] (“Cancel”) key.

The data will be loaded into the numbers that follow the last sample number currently existing in sample data RAM (i.e., that were previously sampled or loaded) (Append load).

You can load multiple files within the directory. (☞ p.145)

26) Load .WAV: selected icon

The selected WAVE file will be loaded as a sample.

1To load the data, press the [F8] (“OK”) key. To cancel without loading, press the [F7] (“Cancel”) key.

The data will be loaded into the numbers that follow the last sample number currently existing in sample data RAM (i.e., that were previously sampled or loaded) (Append load).

Files with an extension of other than .AIF/.WAV cannot be recognized as AIFF/WAVE files. In this case, use the Utility “Rename” (1.1–3a) to change the last four char- acters of the filename to “.AIF”/“.WAV”

If the data that is loaded as a sample contains a loop point, you can set “S.Ofs(Start Offset)” (PROG 2.1–2b, GLOBAL 5.1–1b) on the TRITON Le so that the sound will begin from the loop point.

If data whose sample size is 8 bits or less is loaded, it will be converted into 16 bit data inside the TRITON Le. This will mean that the amount of internal memory consumed will be approximately twice as large as the file size. The increase in size resulting from this conver- sion may mean that it is impossible to save that data on a media.

Loading AKAI S1000/S3000 format Sample files and Program files

If sample data RAM is installed in the TRITON Le, AKAI S1000/S3000 format Sample files and Program files can be loaded (☞ p.147 “About AKAI Program files” for more infor- mation about compatibility). The loaded Sample or Program file data can be used as a sample or multisample respec- tively. When the loaded data is then saved to storage media, it will be saved as a Korg format .KSF file or .KMP file respectively.

AKAI S1000/S3000 format stereo Sample files and Program files whose names end in “-L” and “-R” can be loaded into the TRITON Le as stereo samples and multisamples.

When the above files are loaded, “-L” and “-R” will auto- matically be moved to the end of the sample name or multi- sample name (15th and 16th character) so that they can automatically be recognized as stereo samples or multisam- ples.

27) Load AKAI Sample File: selected icon

The selected Sample will be loaded as a sample.

1To load the data, press the [F8] (“OK”) key. To cancel without loading, press the [F7] (“Cancel”) key.

The data will be loaded into the numbers that follow the last sample number currently existing in sample data RAM (i.e., that were previously sampled or loaded) (Append load). If the loaded data is then saved to storage media, it will be saved as a Korg format .KSF file. (possi-

146