Korg Electric Keyboard manual MEQ Master EQ, MFX 1 Master Effect1 MFX 2 Master Effect2, 4a Utility

Swap Master Effect

This command swaps (exchanges) the settings of MFX1 and MFX2.

1Select “Swap Master Effect” to access the dialog box.

2To execute the Swap Master Effect command, press the [F8] (“OK”) key. To cancel, press the [F7] (“Cancel”) key.

Select by Category

Selects master effects by category.

For the procedure, refer to “Select by Category” (☞ p.2).

This command is valid when the 7.2–1a parameters are on.

7.2–2: MFX 1 (Master Effect1)

7.2–3: MFX 2 (Master Effect2)

Indicates effect parameter settings for the MFX1 and 2 effects that were selected in the Setup page (☞ p.164–).

■7.2–4a: UTILITY

☞“Write Program” (1.1–1c)

7.2 7.1 6.1 5.3 5.2 5.1 4.2 4.1 3.1 2.2 2.1 1.1 PROG

7.2–2a

Effect dynamic modulation (Dmod) is controlled on the global MIDI channel “MIDI Channel” (GLOBAL 2.1– 1a). (☞ p.217 “Dynamic Modulation Source (Dmod)”)

■7.2–2(3)a: UTILITY

☞“Write Program” (1.1–1c)

7.2–4: MEQ (Master EQ)

The master EQ is a three-band stereo EQ. It is used to adjust the overall tonality of the sound immediately before the L/R bus is output to the AUDIO OUTPUT (MAIN OUT) L/ MONO and R jacks (☞ p.209). The MEQ High Gain and the MEQ Low Gain can be controlled by assigning a modualtion source to the “Low Gain Mod-Src.” and “High Gain Mod- src.” functions on this page.

7.2–4a

29