Copy Measure

This command copies measures of musical data from the copy source to the specified measure location.

When you execute the Copy Measure command, the track data at the copy destination will be rewritten.

1Select the copy source song.

2Select “Copy Measure” to access the dialog box.

3In “From: Track,” select the copy source track. (By default, this will be the track you selected in “Track Select.”)

If you check “All Tracks,” the musical data of all tracks including the master track will be copied.

4In “From Measure” and “To End of Measure,” specify the range of copy source measures. (By default, “From Mea- sure” and “To End of Measure” will be the range that you specified in the Track Edit page.)

5In “To: Song,” specify the copy destination song. In “Track” (when “All Tracks” is unchecked) specify the copy destination track. In “Measure,” specify the first measure where the copied measures will be inserted.

6To execute the Copy Measure operation, press the [F8] (“OK”) key. To cancel, press the [F7] (“Cancel”) key.

Example: When you copy measures 5–7 of track 1 to the third measure of track 2, measures 3–5 of track 2 will be rewritten.

Track 1

 

 

 

 

 

 

 

(source)

1 (4/4)

2 (4/4)

3 (4/4)

4 (3/4)

5 (3/4)

6 (3/4)

7 (4/4)

Track 2

 

 

 

 

 

 

 

(destination)

1 (4/4)

2 (4/4)

3 (4/4)

4 (3/4)

5 (3/4)

6 (3/4)

7 (4/4)

 

 

 

 

 

 

 

Move Measure

This command moves measures of musical data to a speci- fied destination. When you execute the Move Measure com- mand, musical data following the move source will be moved forward according to the number of measures moved, and musical data following the move destination will be moved backward correspondingly.

1Select “Move Measure” to access the dialog box.

2In “From: Track,” select the move source track. (By default, this will be the track you selected in “Track Select.”)

If you check “All Tracks,” musical data of all tracks including the master track will be moved.

3In “From Measure” and “To End of Measure,” specify the range of measures that will be moved. (By default, “From Measure” and “To End of Measure” will be the range that you specified in the Track Edit page.)

4In “To: Track” (if “All Tracks” is unchecked), specify the move destination track. In “Measure,” specify the first measure of the move destination.

5To execute the Move Measure command, press the [F8] (“OK”) key. To cancel, press the [F7] (“Cancel”) key.

Example:

When you move the musical data of track 1 measures 2–4 to track 2 measure 3, track 1 measures 2–4 will be inserted into track 2 measures 3–5.

The musical data of track 2 measures 3 and 4 will move back (to measures 6 and 7). The musical data of track 1 measures 5–7 will move to measures 2–4.

Track 1

 

 

 

 

 

 

 

 

(move

 

1

 

 

 

5

6

7

 

 

 

 

 

 

 

 

source)

 

 

 

 

 

 

 

 

 

 

2

3

4

 

 

 

Track 2

 

 

 

 

 

 

 

(move

1

2

3

4

5

6

7

 

 

 

 

 

 

 

destination)

 

 

 

 

 

 

 

Create/Ers. Ctrl (Create/Erase Control Data)

This command inserts (creates) or erases data such as con- trol changes, aftertouch, pitch bend, or tempo in the speci- fied region.

Create Ctrl Data (Create Control Data)

Here’s how you can insert (create) various types of data in the region you specify.

1In “Track Select,” specify the track in which you wish to create control data. If you wish to create tempo data, set this to the Master Track. In this case, “Kind” in step 5 will be Tempo.

2Select “Create/Ers. Ctrl” to access the dialog box.

3Specify the region in which the control data will be inserted. Use “From Measure” to “To Measure” to spec- ify the range of measures, and “Beat. Tick” to specify the beat and clock. (By default, “From Measure” and “To Measure” will be set to the region you specified in the Track Edit page.)

4Set “Mode” to Create.

5“Kind” to the type of musical data (event) that you wish to create.

Ctl.C: Control change data will be inserted. In this case, use “#” to specify the control change number.

AftT: Aftertouch data will be inserted.

BEND: Pitch bend data will be inserted.

6Specify the start location value and end location value of the data that will be inserted.

“Start” specifies the value at the start location, and “End” specifies the value at the end location.

By default, the value at the start location will be set for “Start.” If you want to create control data that changes smoothly from the value at the start location, you should leave the start location value unchanged, and set only the end location value.

78

Page 85
Image 85
Korg Electric Keyboard manual Copy Measure, Move Measure, Create/Ers. Ctrl Create/Erase Control Data