Korg Electric Keyboard manual Prog...8 Program T01...08 Prog...16 Program T09...16, 23a Program

Even when this dialog box is not opened, you can set this value to the current location by holding down the [ENTER] key and pressing the [LOCATE] key.

GM Initialize

This command transmits a GM System On message to Sequencer mode, resetting all tracks to the GM settings (refer to the table below).

In Sequencer mode when a GM System On message is received from an external device or the tone generator will be reset to the GM settings in the same way as when this command is executed (However even in these cases, the parameters of the 7.2: Master Fx will not be reset).

1.1–2: Prog...8 (Program T01...08)

1.1–3: Prog...16 (Program T09...16)

Here you can make basic settings such as selecting the pro- gram used by each track.

1.1–2a

1.1–2b

1.1–1c

1.1–2c

		1.1–2(3)a: Program
		Program Select
				[A...D/000...127, G001...128, g001...g128:d]
		Here you can select the program that will be used by each
		track.
		When this parameter is selected, you can use the VALUE
		controller to make a selection. At this time, the BANK
		SELECT key LEDs will light to indicate the bank of the
		selected program.
		The track number and the abbreviated category name of the
		selected program are displayed above “Program Select.”
			By holding down the [TIMBRE/TRACK] key and
			pressing a [F1](T1/T9)–[F8](T8/T16) key you can move
			to the corresponding track “T1”–“T16.”
			The program bank can also be selected directly by using
			the BANK [A]–[GM] keys.
			When this parameter is selected, you can use the Utility
			menu command “Select by Category” to select a pro-
			gram by category. (☞ p.2)
GM Initialize Parameters
	Parameter	Track1–9, 11–16		Track10
1.1	Program Select	G001:Acoustic Piano		g001: (d): STANDARD Kit
	Pan	C064		C064
	Volume	100		100
3.1	Status	–		–	The setting remains unchanged
3.2
	Use Program’s Scale	–		–	The setting remains unchanged
6.1	Arpeggiator Assign	–		–	The setting remains unchanged
	Other Arpeggiator parameters	–		–	The setting remains unchanged
7.1	IFX/Indiv.Out BUS Select	L/R		DKit
	Send1(MFX1)	0		0
	Send2(MFX2)	40		40
	IFX	–		–	The setting remains unchanged
	Pan(CC#8)	–		–	The setting remains unchanged
	BUS Select	–		–	The setting remains unchanged
	Send1	–		–	The setting remains unchanged
	Send2	–		–	The setting remains unchanged
	Other Insert Effect parameters	–		–	The setting remains unchanged
7.2	MFX1	–		–	16: St. Chorus
	MFX2	–		–	53: Rev Smth. Hall
	Return1	–		–	127
	Return2	–		–	050
	Other Master Effect and Master EQ parameters	–		–	Default settings

54