4.2–2: MIDI 2–2(MIDI Filter 2–2)

4.2–2a

4.2–2b

4.2–2a: JS X/Bend as AMS, Ribbon CC#16

JS X/Bend as AMS

[Off, On]

Specifies whether or not MIDI pitch bend messages (the X axis of this instrument’s joystick) will be received to control the AMS (p.212 “Alternate Modulation Source”) effect assigned to JS X. (This is not a filter for MIDI pitch bend message reception.)

Ribbon CC#16

[Off, On]

Specifies whether MIDI control change message #16 (selected as assignment B for REALTIME CONTROLS [1]–

[4]knobs, or assigned to the ribbon controller of a TRITON etc.) will be transmitted or received.

Knob2

[Off, On]

Specifies whether MIDI control change message #71 (inter- nal low pass filter resonance or high pass filter cutoff fre- quency) for the A-mode of knob [2] and the MIDI control change message assigned to the B-mode of knob [2] will be transmitted and received.

4.3–2a: Real-time Control Knob 3, 4

Knob3

[Off, On]

Specifies whether MIDI control change message #79 (inter- nal filter EG intensity) for the A-mode of knob [3] and the MIDI control change message assigned to the B-mode of knob [3] will be transmitted and received.

Knob4

[Off, On]

Specifies whether MIDI control change message #72 (inter- nal filter and amp EG release time) for the A-mode of knob

[4]and the MIDI control change message assigned to the B- mode of knob [4] will be transmitted and received.

4.3–1(2)b: UTILITY

“Write Combination,” “Solo Selected Timbre” (1.1–1c)

4.2–2b: UTILITY

“Write Combination,” “Solo Selected Timbre” (1.1–1c)

COMBI 4.3: Ed–MIDI Filter3

Specifies whether the A- and B-mode effects of REALTIME CONTROLS knobs [1], [2], [3], and [4] will be transmitted and received. The A-mode of each knob is fixed as a MIDI control change message. For B-mode, you can assign a MIDI control change message in 2.2: Ed-Ctrl.

COMBI 4.4: Ed–MIDI Filter4

4.4–1: MIDI 4–1(MIDI Filter 4–1)

4.4–1a

4.4–1b

4.3–1: MIDI 3–1(MIDI Filter 3–1)

4.3–2: MIDI 3–2(MIDI Filter 3–2)

4.3–1a

4.3–1b

4.3–1a: Real-time Control Knob 1, 2

Knob1

[Off, On]

Specifies whether MIDI control change message #74 (inter- nal low pass filter cutoff frequency) for the A-mode of knob

[1]and the MIDI control change message assigned to the B- mode of knob [1] will be transmitted and received.

4.4–1a: SW1, SW2

SW1, SW2

[Off, On]

Specifies whether or not the effect of the [SW1] key and [SW2] key will be transmitted and received.

[SW1] key and [SW2] key correspond to the control change messages specified in 2.2: Ed-Ctrl.

This filter setting is valid for settings of SW1 Mod.(CC#80), SW2 Mod.(CC#81), or Porta.SW(CC#65).

4.4–1b: UTILITY

“Write Combination,” “Solo Selected Timbre” (1.1–1c)

42

Page 49
Image 49
Korg Electric Keyboard manual Combi 4.3 Ed-MIDI Filter3, Combi 4.4 Ed-MIDI Filter4