Korg Electric Keyboard manual Comp-M.Dly, Limit-P4EQ, 200, Compressor Multitap Delay

69: Comp–M.Dly

(Compressor – Multitap Delay)

This effect combines a mono-type compressor and a multitap delay. You can change the order of the effect connection.

Wet: Mono In - Mono Out / Dry: Stereo In - Stereo Out
Left		Routing	Wet / Dry
	Compressor
		Multitap Delay
	EQ Trim LEQ HEQ		Feedback
	+	Comp	Delay
			(2)
		High Damp (1)
		Output Level	Mt.Dly Wet / Dry
Right			Wet / Dry
	Envelope - Control
a	[CMP] Sensitivity		1...100
	Sets the sensitivity		☞ Fx:02

	Attack	1...100
b	Sets the attack level	☞ Fx:02
	Level (Output Level)	0...100
	Sets the compressor output level	☞ Fx:02
c	Pre EQ Trim	0...100
	Sets the EQ input level
	LoEQ (Pre Low EQ Gain)	–15...+15dB
d	Sets the gain of Low EQ
	HiEQ (Pre High EQ Gain)	–15...+15dB
	Sets the gain of High EQ
	[DLY] T1 (Tap1 Delay)	0...680msec
e	Sets the Tap1 delay time
	T2 (Tap2 Delay)	0...680msec
	Sets the Tap2 delay time
	T1 Level (Tap1 Level)	0...100
f	Sets the Tap1 output level	☞ Fx:45
	T2 (Tap2 Delay)	–100...+100
	Sets the Tap2 feedback amount
	Dly W/D (Delay Wet/Dry)	Dry, 1:99...99:1, Wet
g	Sets the multitap delay effect balance
	HiDamp (High Damp)	0...100%
	Sets the damping amount in the high range	☞ Fx:43
h	[Routing]	CMP→ DLY, DLY→ CMP
	Switches the order of the compressor and multitap delay connection
	W/D (Wet/Dly)	Dry, 1:99...99:1, Wet
	Sets the balance between the effect and dry sounds
i	(Source)	Off...Tempo
	Selects the modulation source of the effect balance
	(Amount)	–100...+100
	Sets the modulation amount of the effect balance

70: Limit–P4EQ

(Limiter – Parametric 4-Band EQ)

This effect combines a mono-type limiter and a four-band parametric equalizer. You can change the order of the effect connection.

Wet: Mono In - Mono Out / Dry: Stereo In - Stereo Out
Left				Wet / Dry
			Routing
		Limiter
			Parametric 4Band EQ
	+	Limiter
		Gain Adjust	Trim
Right				Wet / Dry
		Envelope - Control
a	[LMT] Ratio			1.0:1...50.0:1, Inf:1
	Sets the signal compression ratio			☞ Fx:03

	Threshld (Threshold)		–40...0dB
b	Sets the level above which the compressor is applied		☞ Fx:03
	G.Adj (Gain Adjust)	–Inf, –38...+24dB
	Sets the limiter output gain		☞ Fx:03
	Attack		1...100
c	Sets the attack time		☞ Fx:03
	Release		1...100
	Sets the release time		☞ Fx:03
d	[PEQ] Trim		0...100
	Sets the parametric EQ input level
e	[Routing]	LMT→ PEQ, PEQ→ LMT
	Switches the order of the limiter and parametric EQ connection
	B1 (Band1 Cutoff)		20...1.00kHz
	Sets the center frequency of Band 1
f	Q		0.5...10.0
	Sets the bandwidth of Band 1		☞ Fx:06
	G (Gain)		–18...+18dB
	Sets the gain of Band 1
	B2 (Band2 Cutoff)		50...5.00kHz
	Sets the center frequency of Band 2
g	Q		0.5...10.0
	Sets the bandwidth of Band 2		☞ Fx:06
	G (Gain)		–18...+18dB
	Sets the gain of Band 2
	B3 (Band3 Cutoff)		300...10.00kHz
	Sets the center frequency for Band 3
h	Q		0.5...10.0
	Sets the bandwidth of Band 3		☞ Fx:06
	G (Gain)		–18...+18dB
	Sets the gain of Band 3
	B4 (Band4 Cutoff)		500...20.00kHz
	Sets the center frequency for Band 4
i	Q		0.5...10.0
	Sets the bandwidth of Band 4		☞ Fx:06
	G (Gain)		–18...+18dB
	Sets the gain of Band 4
	W/D (Wet/Dly)	Dry, 1:99...99:1, Wet
	Sets the balance between the effect and dry sounds
j	(Source)		Off...Tempo
	Selects the modulation source of the effect balance
	(Amount)		–100...+100
	Sets the modulation amount of the effect balance

200