Korg Electric Keyboard manual Sequencer mode

3. Sequencer mode

In Sequencer mode you can use the built-in 16-track sequencer to play, record and edit songs. You can also record and play patterns, make settings for the RPPR (Realtime Pat- tern Play Recording) function, play songs that use the arpeg- giators, record patterns, and create Cue Lists to playback multiple songs consecutively.

If the EXB-SMPL option (sold separately) is installed, executing the Sampling mode “Time Slice” command (SMPL 3.1–2e) will divide the sample and will at the same time create song performance data for these divided samples. You can then freely re-create the origi- nal rhythm loop in various ways; for example you can change the song tempo in Sequencer mode to play the rhythm loop at a different tempo without changing the pitch, or you can edit the sequence data to change the note numbers or timing.

These settings and any song data you have recorded are not backed up when the power is turned off. Before turning off the power, be sure to save important data on a SmartMedia or a data filer. Immediately after the power is turned on, memory will not contain any song data, so in order to playback the sequencer, you will need to load data from the SmartMedia, or receive a MIDI bulk data dump from an external MIDI sequencer (☞ p.130).

SEQ PAGE MENU

For details on how to select pages in Sequencer mode, refer to p.1.

P/R	1.1: Play/REC	Make settings for song playback/record-
		ing, select a program for track, and make
		pan and level settings. (☞ p.50)
Loop	1.2: Loop	Make settings for track play loop function.
		(☞ p.57)
Cue	2.1: Cue List	Play, create, and make settings for cue
		lists. (☞ p.58)
Ctrl	2.2: Controller	Controller settings. (☞ p.61)
Prm1	3.1: Param1	MIDI, OSC, and pitch settings for each
		track. (☞ p.62)
Prm2	3.2: Param2	Delay and scale settings for each track.
		(☞ p.64)
KeyZ	3.3: Key Zone	Key zone settings for each track. (☞ p.64)
VelZ	3.4: Vel Zone	Velocity zone settings for each track.
		(☞ p.65)
MIDI1	4.1: MIDI Filter1	MIDI message transmission/reception fil-
		ter settings for each track: Prog Change,
		After Touch etc. (☞ p.66)
MIDI2	4.2: MIDI Filter2	Filter settings: JS, Ribbon Ctrl etc.
		(☞ p.67)
MIDI3	4.3: MIDI Filter3	Filter settings: REALTIME CONTROL
		Knob (☞ p.68)
MIDI4	4.4: MIDI Filter4	Filter settings: SW, Other Ctrl Change
		(☞ p.68)
RPPR	5.1: RPPR	Pattern recording and editing. Pattern
		name settings. RPPR settings. (☞ p.69)
TEdit	5.2: Track Edit	Edit track playback data. Specify track
		names. (☞ p.73)
Arp	6.1: Arp.	Arpeggiator settings. (☞ p.81)
IFX	7.1: Insert FX	Set BUS and master effect send level for
		each track.
		Insert effect routing, selection, and set-
		tings. (☞ p.84)
MFX	7.2: Master FX	Master effect selection and settings. Mas-
		ter EQ settings. (☞ p.85)

7.2 7.1 6.1 5.2 5.1 4.4 4.3 4.2 4.1 3.4 3.3 3.2 3.1 2.2 2.1 1.2 1.1 SEQ

49