Korg Electric Keyboard Prog 1.1 Play, Program, Bank Bank A...D, G, gd, Other ways to select a

1. Program mode

PROG PAGE MENU

Use the following procedure to select the desired page from within the current mode.

1Press the [MENU] key to access the “PAGE MENU.” The “PAGE MENU” will show an abbreviated name for each page.

2Use the [F1]–[F7] keys at the bottom of the page to select the desired page. Pressing the same key repeatedly will scroll through the various sub-pages. You can also move by using the cursor keys [ ], [ ], [ ], [].

3Press the [F8] (“Open”) key to access the page.

4If the selected page contains two or more tab pages, press the nearest [F1]–[F7] key below the tabs to select the desired page.

Other ways to select a page

•You can also move to the desired page by holding down the [MENU] key and using numeric keys [0]–[9] to enter a two-digit page number. For example if you wish to access the 5.3: Ed-LFOs page, hold down the [MENU] key and consecutively press numeric keys [5] and then [3].

•By holding down the [MENU] key and using the cursor

keys [ ](–) or [ ](+), you can step through the pages forward or backward in the order of 1.1→ 2.1→ 2.2→ 3.1, etc.

Play	1.1: Play	Select and play programs. Use the Per-
		formance Editor for easy editing, and to
		do simple editing of arpeggio patterns.
		(☞ p.1)
Basic	2.1: Ed-Basic	Set basic program parameters such as
		Oscillator and Multisample. (☞ p.5)
Ctrl	2.2: Ed-Ctrl	Controller settings. (☞ p.9)
Pitch	3.1: Ed-Pitch	Pitch settings. Pitch EG settings.
		(☞ p.10)
Flt1	4.1: Ed-Filter1	Filter 1 (tone) settings. Filter EG set-
		tings. (☞ p.13)
Flt2	4.2: Ed-Filter2	Filter 2 (tone) settings. Filter EG set-
		tings. (☞ p.18)
Amp1	5.1: Ed-Amp1	Amp 1 (volume) settings. Amp EG, pan
		(position) settings. (☞ p.18)
Amp2	5.2: Ed-Amp2	Amp 2 (volume) settings. Amp EG, pan
		(position) settings. (☞ p.22)
LFO	5.3: Ed-LFOs	Type and speed settings etc. for the
		two LFOs provided for each oscillator.
		(Make settings in the pitch, filter, and
		amp pages to specify the depth of the
		LFO settings you make here.) (☞ p.22)
Arp	6.1: Ed-Arp.	Arpeggiator settings. (Shared with 1.1:
		Play parameters. You may edit either.)
		(☞ p.24)
IFX	7.1: Ed-InsertFX	Select the BUS and master effect send
		level for the oscillator output.
		Insert Effect routing, selection and set-
		tings. (☞ p.26)
MFX	7.2: Ed-MasterFX	Master Effect selection and settings.
		Master EQ settings. (☞ p.28)

PROG 1.1: Play

In this display page you can select and play programs.

All MIDI data in PROG 1.1: Play is transmitted and received on the Global MIDI Channel (☞ GLOBAL 2.1– 1a).

1.1–1: Program

1.1–1a

1.1–1b

1.1–1c

1.1–1a: Bank, Program Select, Category, Cat. Hold, 10’s Hold, (Tempo)

Bank [Bank A...D, G, g(d)]

This is the program bank display.

Use the BANK [A]–[GM] keys to select the bank.

Bank G will toggle between the GM and g(d) banks each time you press the BANK [GM] key.

G→ g(d)→ G→ g(d)→ G…

The TRITON Le provides rewritable banks A, B, C, and D, each containing 128 programs (total 512). As for non-rewrit- able program areas, it provides banks G (capital programs for GM), and bank g(d) (drums). (☞ For a list of the factory- set programs, refer to the separate VNL.)

Bank A
Bank B	for preloaded programs
Bank C
Bank D000~063
Bank D064~127	For user programs (programs that use multisam-
	ples created in Sampling mode (when the sepa-
	rately sold EXB-SMPL option is installed))
Bank G	GM capital program
Bank g(d)	GM drums program

7.2 7.1 6.1 5.3 5.2 5.1 4.2 4.1 3.1 2.2 2.1 1.1 PROG

1