Korg Electric Keyboard manual Prog 2.2 Ed-Ctrl, Audit. Audition, Ctrls Controls

2.1–5: Audit. (Audition)

When selecting preloaded programs, you can play back a pre-specified riff (phrase) that is suitable for the sound of that program. This is called the Audition function.

When you press the [AUDITION] key to turn it on, the audi- tion riff will play back repeatedly.

Here you can select the audition riff and specify the transpo- sition.

2.1–5a

2.1–5b

PROG 2.2: Ed–Ctrl

These settings specify the B-mode functions of the REAL- TIME CONTROLS knobs [1]–[4] in Program mode, and the functions of the [SW1] key, the [SW2] key.

2.2–1: Ctrls (Controls)

2.2–1a

2.2–1b2.2–1c

4.1 3.1 2.2 2.1 1.1 PROG

2.1–5a: Audition Riff, Transpose

Audition Riff [000: Off...383: Name]

Selects the audition riff. The TRITON Le contains 383 audi- tion riffs suitable for a variety of instruments and musical genres. (☞ “VNL”)

With a setting of 000: Off, no riff will be played.

Transpose [–24...+24]

Adjusts the pitch of the audition riff in semitone steps.

It is not possible to change the playback tempo of the audition riff. Nor is it possible to set the arpeggiator tempo while the audition riff is playing.

The arpeggiator will be turned off while the audition riff is playing.

■2.1–5b: UTILITY

☞“Write Program” (1.1–1c)

2.2–1a: Knob B Assign

Here you can assign functions (mainly various types of con- trol change) to the B-mode of the REALTIME CONTROLS knobs [1]–[4] (☞ p.221 “Realtime Control Knobs B Assign List”).

The functions you set here will take effect when you operate the REALTIME CONTROLS knobs [1]–[4] in B-mode.

Knob1–B (Knob1–B Assign)	...[Off	MIDI CC#95]
Knob2–B (Knob2–B Assign)	...[Off	MIDI CC#95]
Knob3–B (Knob3–B Assign)	[Off	MIDI CC#95]
Knob4–B (Knob4–B Assign)	[Off	MIDI CC#95]

2.2–1b: SW1/2 Assign

These settings assign functions to [SW1] and [SW2] keys (☞ p.220 “SW1, SW2 Assign List”).

SW1 Assign [Off...AfterT Lock]

Here you can assign a function to the [SW1] key.

The on/off status of the switch is saved when the program is written. When you change the function, it will be reset to the “off” state.

SW1 Mode [Toggle, Momentary]

Specifies the on/off state that will occur when you press the [SW1] key.

Toggle: The key will alternate on/off each time you press [SW1] key.

Momentary: The key will be on only while you continue holding [SW1] key.

SW2	Assign	[Off...AfterT Lock]
SW2	Mode	[Toggle, Momentary]

Here you can assign a function to [SW2] key.

The functions that can be assigned to [SW2] key are the same as for [SW1] key, with the exception of SW2 Mod. (CC#81) instead of SW1 Mod. (CC#80).

Although the following values can be selected for “SW1 Assign” and “SW2 Assign,” they will have no effect in actuality.

Data is compatible between this instrument and the TRITON/TRITONpro/TRITONproX and the TRITON- Rack. Programs created on the TRITON series can be used by this instrument.

7.2 7.1 6.1 5.3 5.2 5.1 4.2

9