Korg Electric Keyboard PitchShft Mod, Rotary SP, 186, Pitch Shift Modulation, Rotary Speaker

39: PitchShft Mod

(Pitch Shift Modulation)

This effect modulates the detuned pitch shift amount using an LFO, adding a clear spread and width to the sound by pan- ning the effect sound and dry sound to the left and right. This is especially effective when the effect sound and dry sound output from stereo speakers are mixed.

Wet: Mono In - Stereo Out / Dry: Stereo In - Stereo Out
Left	Wet / Dry
+	Pitch Shifter
	Pan
Right	Wet / Dry
LFO: Tri / Sqr

a	Pitch Shift	–100...+100cent
	Sets the pitch difference from the input signal			☞
b	LFO Wave (LFO Waveform)	Triangle, Square
	Selects LFO Waveform
	Freq (LFO Frequency)	0.02...20.00Hz
	Sets the LFO speed	☞ Fx:09,
c	(Source)		Off...Tempo
	Selects the modulation source of LFO speed
	(Amount)	–20.00...+20.00Hz
	Sets the modulation amount of LFO speed
	BPM/MIDI Sync		Off, On
	Switches between using the frequency of the LFO speed and using
	the tempo and notes	☞ Fx:09,
	BPM	MIDI, 40...240
d	Selects MIDI Clock and assigns tempo		☞ Fx:09
	Base (Base Note)		☞ Fx:09
	Selects the type of notes that specify the LFO speed
	Times		1...16
	Sets the number of notes that specify the LFO speed		☞ Fx:09
	Depth	–100...+100
	Sets the LFO modulation depth for pitch shift amount		☞ ,
e	(Source)		Off...Tempo
	Selects the modulation source of the depth of modulation
	(Amount)	–100...+100
	Sets the modulation amount of the depth of modulation
f	Pan	L, 1:99...99:1, R
	Sets the panning effect sound and dry sound separately			☞
	W/D (Wet/Dly)	Dry, 1:99...99:1, Wet
	Sets the balance between the effect and dry sounds		☞ ,
g	(Source)		Off...Tempo
	Selects the modulation source of the effect balance
	(Amount)	–100...+100
	Sets the modulation amount of the effect balance

a: Pitch Shift [cent], e: Depth

These parameters set the amount of pitch shift and amount of modulation by means of the LFO.

Pitch Shift Mod - Pitch Shift / Depth

Pitch
Higher	LFO Waveform=Triangle
	Depth (+value)
	Pitch Shift (+ value)
Original Pitch
Lower	LFO Waveform=Square
	Depth (–value)

f: Pan, g: W/D

The Pan parameter pans the effect sound and dry sound to the left and right. With L, the effect sound is panned left, and the dry sound is panned right. With a W/D = Wet setting, the effect and dry sound will be output in a proportion of 1:1.

40: Rotary SP

(Rotary Speaker)

This effect simulates a rotary speaker, and obtains a more real- istic sound by simulating the rotor in the low range and the horn in the high range separately. The effect also simulates the stereo microphone settings.

Wet: Mono In - Stereo Out / Dry: Stereo In - Stereo Out
Left			Wet / Dry
	Horn
+	Rotary Speaker	Horn/Rotor	Mic Distance
		Balance	Mic Spread
	Rotor
Right	Speaker Simulation
			Wet / Dry
D-mod
	Mode Switch: Rotate/Stop
D-mod	Speed Switch: Slow/Fast
D-mod	Manual Speed Control

	Mode (Mode Switch)	Rotate, Stop
	Switches between speaker rotation and stop
	(Source)	Off...Tempo
a	Selects the modulation source that toggles between rotation and
	stop
	(Sw)	Tggl, Mmnt
	Selects switching mode of the modulation source that toggles
	between rotation and stop		☞
	Speed (Speed Switch)	Slow, Fast
	Switches the speaker rotation speed between slow and fast
	(Source)	Off...Tempo
b	Selects the modulation source that toggles between slow and fast
	(Sw)	Tggl, Mmnt
	Selects switching mode of the modulation source that toggles
	between slow and fast		☞
	H/R.Bal (Horn/Rotor Balance)	Rot, 1...99, Hrn
	Sets the level balance between the high-range horn and low-range
c	rotor
	ManuSp (Manual Speed Control)	Off...Tempo
	Selects the modulation source in case the rotation speed is changed
	directly	☞ ,
	Horn Accel (Horn Acceleration)	0...100
	How quickly the horn rotation speed in the high range is switched
d			☞
	Ratio (Horn Ratio)	Stop, 0.50...2.00
	Adjusts the (high-range side) horn rotation speed. Standard value is
	1.00. Selecting “Stop” will stop the rotation
	Rotor Accel (Rotor Acceleration)	0...100
	Determines how quickly the rotor rotation speed in the low range is
e	switched		☞
	Ratio (Rotor Ratio)	Stop, 0.50...2.00
	Adjusts the (low-range side) rotor rotation speed. Standard value is
	1.00. Selecting “Stop” will stop the rotation
	MicDistance	0...100
f	Sets the distance between the microphone and rotary speaker ☞
	Spread (Mic Spread)	0...100
	Sets the angle of left and right microphones		☞
	W/D (Wet/Dly)	Dry, 1:99...99:1, Wet
	Sets the balance between the effect and dry sounds
g	(Source)	Off...Tempo
	Selects the modulation source of the effect balance
	(Amount)	–100...+100
	Sets the modulation amount of the effect balance

a: (Sw)

This parameter sets how the modulation source switches between rotation and stop.

When “Sw” = Tggl (Toggle), the speaker rotates or stops alter- nately each time you press the pedal or operate the joystick.

Each time the value for the modulation source exceeds 64, the speaker rotates or stops alternately.

186