Korg Electric Keyboard manual 1b Program Information, 1c Utility

Program Select

[(A…D)0…127: name, (G, g(d))1…128: name]

Selects a program.

Choose this parameter, and use the [INC], [DEC] keys, numeric keys [0]–[9], or the [VALUE] dial to select a pro- gram.

You can select programs by category, or by using “10’s Hold.” (☞ “Category,” “Cat. HOLD,” “10’s HOLD”)

You can receive MIDI program changes from a con- nected external MIDI device, or use a foot switch to select programs. (☞ p.125 “Foot SW Assign” (GLOBAL 1.1–3a), p.222 “Foot Switch Assign List”)

Category [00...15: Name]

Selects the program category.

All programs are classified into one of sixteen categories. You can select the desired category, and then choose pro- grams from that category.

For the procedure of selecting programs from a category, refer to “Cat. HOLD” and “Select by Category.”

To assign a category to each program, use the “Write Program” (1.1–1c) dialog box. To change the name of a category, use “Category Name Prog. 00–07, 08–15” (☞ GLOBAL 4.1–1/2).

Cat. HOLD (Category Hold)

1Press the [./HOLD] key to display . The cate- gory will be held (fixed).

2Use “Category” to select the desired category.

3Choose “Program Select,” and use the [INC], [DEC] keys or the [VALUE] dial to select programs sequentially within the specified category.

4To cancel, press the [./HOLD] key twice to turn off the

display.

If you press the [./HOLD] key in PROG 1.1: Play, the

selection will cycle in the order of → → Cancel.

Select by Category

1Press the [F8] (“UTILITY”) key to access the Utility menu.

2Press the [F7] key or use the cursor [ ]/[ ] keys to select “Select by Category,” and press the [F8] (“OK”) key. The Select Program by Category dialog box will appear.

You can directly access the Category dialog box by pressing the [CATEGORY] key. (☞ BG p.21)

3Press the [F1] (“”), [F2] (“”), [F3] (“”),

or [F4] (“”) keys to select the category that includes the program.

Alternatively, you can use the cursor [ ]/[ ] keys to select “Cat:,” and use the [INC]/[DEC] keys or the [VALUE] dial to select the category.

4Use the cursor [ ]/[ ] keys to select a program in the list. Alternatively, use the cursor [ ]/[ ] keys to select “Idx:” and then use the [INC]/[DEC] keys or the [VALUE] dial to select the program.

5To execute, press the [F8] (“OK”) key. To cancel without executing, press the [F7] (“Cancel”) key.

2

10’s HOLD

1Press the [./HOLD] key twice to display .

The first digit of the program number will be held (fixed).

2When you press a numeric key [0]–[9], the second digit of the program number will be input with a single action.

3You can use the [INC], [DEC] keys to change the first digit.

4To cancel, press the [./HOLD] key to turn off the

display.

(Tempo) [040...240, EXT]

This sets the tempo of the arpeggiator. The tempo can also be adjusted by the REALTIME CONTROLS C-mode [TEMPO] knob.

A display of EXT indicates that the “MIDI Clock” (GLOBAL 2.1–1a) setting has been set to External, and that the arpeg- giator will synchronize to MIDI Clock messages received from an external MIDI device.

This parameter can also be set from 6.1: Ed-Arp.

1.1–1b: Program Information

This display shows the functions that are assigned to the [SW1] key, [SW2] key, and REALTIME CONTROLS B-mode [ASSIGNABLE 1]–[ASSIGNABLE 4] knobs for the selected program.

■1.1–1c: UTILITY

Use the following procedure to select the desired utility.

1Press the [F8] (“UTILITY”) key to access the Utility menu.

2Press the [F7] key or the cursor keys [ ], [ ], [ ], [ ] to select the desired utility.

3Press the [F8] (“OK”) key to access the dialog box.

Utilities up to number 10 can also be selected by hold- ing down the [ENTER] key and pressing the corre- sponding numeric key [0]–[9] to access the dialog box.

Write Program

If you wish to save a program, be sure to write it into the memory of the TRITON Le.

An edited program cannot be recovered if you do not write it to memory before turning off the power or selecting another program.

1Select “Write Program” to access the dialog box.

2The upper line shows the bank, program number and program name.

3In “Category,” specify the category of the program that you are writing. With the factory settings, the program categories have been given the names of instruments etc., but you can use “Category Name Prog.00–07, 08–15” (GLOBAL 4.1–1/2) to modify these category names. The category selected here can be used to find this program when selecting a program in Program, Combination, Sequencer.