Korg Electric Keyboard manual Global 4.1 Category Name, 131, 2a User All Notes Scale

■3.1–1b: UTILITY

☞“Write Global Setting” (1.1–1d)

For details on how to select the desired utility function, refer to “PROG 1.1–1c: UTILITY.”

Copy Scale

This command copies a preset scale or user scale to the user scale that you wish to edit. For details on the preset scales, refer to “Type” (PROG 2.1–1c).

1Select “Copy Scale” to access the dialog box.

2Select the copy source scale (“From”).

If you select Pure Major or Pure Minor, you must also specify the “Key” selection located at the right.

Stretch can be selected only if “To” is the User All Notes Scale.

3Select the copy destination scale (“To”).

4To execute the Copy Scale command press the [F8] (“OK”) key. To cancel without executing press the [F7] (“Cancel”) key.

3.1–2: All Notes

3.1–2a

3.1–2b

3.1–2a: User All Notes Scale

Tune [–99…+99]

Here, you can make independent pitch settings for each of the 128 notes.

Adjust the pitch of each of the 128 notes (C–1 – G9) in one- cent steps. This adjustment is relative to equal temperament.

A setting of –99lowers the pitch approximately a semitone below normal pitch.

A setting of +99 raises the pitch approximately a semitone above normal pitch.

In the case of the “User All Notes Scale,” you can select Stretch in the Utility menu command “Copy Scale” (3.1–1b).

Use the cursor keys [ ], [ ] to select the key that you wish to set. You can also select the key by holding down the [ENTER] key and playing a note on the keyboard.

Key Select[C–1...G9]

This indicates the location of the key displayed in “Tune.”

You can use the cursor keys [	], [ ] to move in one-octave
steps.
“Tune”
Indicates that there	Indicates that there
are keys to the left.	are keys to the right.

Key Select

■3.1–2b: UTILITY

☞“Write Global Setting” (1.1–1d), “Copy Scale” (3.1–1b)

GLOBAL 4.1: Category Name

4.1–1: P.0..7 (Prog.00...07)

4.1–2: P.8..15 (Prog.08...15)

4.1–3: C.0..7 (Comb.00...07)

4.1–4: C.8..15 (Comb.08...15)

Here you can assign names to the program and combination categories.

Select the category whose name you wish to modify, press the [F5] (“TEXT”) key to access the text dialog box, and input the name.

A maximum of 16 characters can be input (☞ BG p.43). With the factory settings, these are classified by type of instrument.

You can specify sixteen categories each for programs and combinations.

The category names you edit here can be specified when you write data in the “Write Program dialog box” (PROG 1.1–1c: UTILITY) or “Write Combination dialog box” (COMBI 1.1–1c: UTILITY), and used in the respec- tive “Select by Category” function to select programs or combinations by category.

4.1–1a

4.1–1b4.1–1c

4.1–3a

4.1–3b4.1–3c

6.1 5.1 4.1 3.1 2.1 1.1 GLOBAL

131