Korg Electric Keyboard manual 44 St/Cross Dly, 45 St.MltTap Dly, 189, Stereo/Cross Delay

44: St/Cross Dly

(Stereo/Cross Delay)

This is a stereo delay, and can by used as a cross-feedback delay effect in which the delay sounds cross over between the left and right by changing the feedback routing.

Stereo In - Stereo Out
Left		Wet / Dry
	High Damp	Low Damp
Input Level D-mod	Delay
Stereo/Cross	Feedback	Spread
Input Level D-mod	High Damp	Low Damp
	Delay	Stereo/Cross
Right		Wet / Dry

a	Stereo/Cross		Stereo, Cross
	Switches between stereo delay and cross-feedback delay
b	L Delay (L Delay Time)		0.0...680.0ms
	Sets the delay time for the left channel
c	R Delay (R Delay Time)		0.0...680.0ms
	Sets the delay time for the right channel
	L Fb (L Feedback)		–100...+100
	Sets the feedback amount for the left channel
d	(Source)		Off...Tempo
	Selects the modulation source of feedback amount
	(Amount L)		–100...+100
	Sets the modulation amount of the left channel feedback
	R Fb (R Feedback)		–100...+100
e	Sets the feedback amount for the right channel
	(Amount R)		–100...+100
	Sets the modulation amount of the right channel feedback
f	HiDamp (High Damp)		0...100%
	Sets the damping amount in the high range		☞ Fx:43
g	LoDamp (Low Damp)		0...100%
	Sets the damping amount in the low range		☞ Fx:43
	InLvl Mod (Input Level Dmod [%])		–100...+100
h	Sets the modulation amount of the input level	☞ Fx:37,
	Src (Source)		Off...Tempo
	Selects the modulation source for the input level		☞ Fx:37
i	Spread		–50...+50
	Sets the width of the stereo image of the effect sound		☞ Fx:43
	W/D (Wet/Dly)	Dry, 1:99...99:1, Wet
	Sets the balance between the effect and dry sounds
j	(Source)		Off...Tempo
	Selects the modulation source of the effect balance
	(Amount)		–100...+100
	Sets the modulation amount of the effect balance

45: St.MltTap Dly

(Stereo Multitap Delay)

The left and right Multitap Delays have two taps respectively. Changing the routing of feedback and tap output allows you to create various patterns of complex effect sounds.

Stereo In - Stereo Out
Left						Wet / Dry
		Feedback
			Delay	(2)
Input Level D-mod	High Damp Low Damp		(1)
						Tap1=(1)
	Mode	Tap1 Level		Mode	Spread
						Tap2=(2)
Input Level D-mod	High Damp Low Damp		(1)
				(2)
			Delay
Right		Feedback
						Wet / Dry

Mode: Normal Mode: Cross Feedback Mode: Cross Pan1 Mode: Cross Pan2

a	Mode	Normal, Cross Feedback, Cross Pan1, Cross Pan2
	Switches the left and right delay routing			☞
b	Tap1 Time		0.0...680.0ms
	Sets the Tap1 delay time
c	Tap2 Time		0.0...680.0ms
	Sets the Tap2 delay time
d	Tap1 Level		0...100
	Sets the Tap1 output level			☞
	Fb(T2) (Tap2 Feedback)		–100...+100
	Sets the Tap2 feedback amount
e	(Source)		Off...Tempo
	Selects the modulation source of the Tap2 feedback amount
	(Amount)		–100...+100
	Sets the modulation amount of the Tap2 feedback amount
	HiDamp (High Damp)		0...100%
f	Sets the damping amount in the high range		☞ Fx:43
	LoDamp (Low Damp)		0...100%
	Sets the damping amount in the low range		☞ Fx:43
	InLvl Mod (Input Level Dmod [%])		–100...+100
g	Sets the modulation amount of the input level		☞ Fx:37,
	Src (Source)		Off...Tempo
	Selects the modulation source for the input level		☞ Fx:37
	Spread		–100...+100
	Sets the width of the stereo image of the effect sound
			☞ Fx:43,
h	(Source)		Off...Tempo
	Selects the modulation source of the effect sound’s stereo image
	width
	(Amount)		–100...+100
	Sets the modulation amount of the effect sound’s stereo image width
	W/D (Wet/Dly)		Dry, 1:99...99:1, Wet
	Sets the balance between the effect and dry sounds
i	(Source)		Off...Tempo
	Selects the modulation source of the effect balance
	(Amount)		–100...+100
	Sets the modulation amount of the effect balance

a: Mode

You can change how the left and right delay signals are panned by modifying the routing of the left and right delay as shown in the figure above. You need to input different sounds to each channel in order for this parameter to be effective.

d: Tap1 Level

This parameter sets the output level of Tap1. Setting a different level from Tap2 will add a unique touch to a monotonous delay and feedback.

Effect

189