Korg Electric Keyboard manual 24 St.Rndm Phasr, 25 St.Env.Phaser, 177, Stereo Random Phaser

24: St.Rndm Phasr

(Stereo Random Phaser)

This is a stereo phaser. The effect uses a step-shape waveform and random LFO for modulation, creating a unique phasing

effect.

Stereo In - Stereo Out

Left

Wet / Dry

Phaser

Resonance

High Damp

Phaser

Right

Wet / Dry

LFO Phase

LFO: Step-Tri/Random

a	LFO Wave (LFO Waveform)	Step-Tri, Step-Sin, Random
	Selects LFO Waveform	☞ Fx:10
b	LFO Phase	–180...+180deg
	Sets the LFO phase difference between the left and right ☞ Fx:10
	Freq (LFO Frequency)	0.02...20.00Hz
	Sets the LFO speed	☞ Fx:10,
	(Source)	Off...Tempo

cSelects the modulation source commonly used for LFO speed and step speed

	(Amount)	–20.00...+20.00Hz
	Sets the modulation amount of LFO speed
	Freq (LFO Step Frequency)	0.05...50.00Hz
d	Sets the LFO step speed	☞ Fx:10,
	(Amount)	–50.00...+50.00Hz
	Sets the modulation amount of LFO step speed
	Manual		0...100
e	Sets the frequency to which the effect is applied
	Depth		0...100
	Sets the depth of LFO modulation
	BPM/MIDI Sync		Off, On
	Switches between using the frequency of the LFO speed and using
	the tempo and notes	☞ Fx:09,
	BPM	MIDI, 40...240
f	Selects MIDI Clock and assigns tempo		Fx:09, 10
	Base (Base Note)		☞ Fx:09
	Selects the type of notes that specify the LFO speed
	Times		1...16
	Sets the number of notes that specify the LFO speed		☞ Fx:09
	Step Base (Step Base Note
	Selects the type of notes to specify the LFO step speed
g		☞ Fx:10,
	Times		1...32
	Sets the number of notes to specify the LFO step speed		☞ Fx:10
	Resonanc (Resonance)		–100...+100
h	Sets the resonance amount		☞ Fx:23
	HiDamp (High Damp)		0...100%
	Sets the resonance damping amount in the high range		☞ Fx:23
	W/D (Wet/Dly)	–Wet...–1:99, Dry, 1:99...Wet
	Sets the balance between the effect and dry sounds
		☞ Fx:10, 23,
i (Source)			Off...Tempo
	Selects the modulation source of the effect balance
	(Amount)		–100...+100
	Sets the modulation amount of the effect balance

25: St.Env.Phaser

(Stereo Envelope Phaser)

This stereo phaser uses an envelope generator for modula- tion. You will obtain the same pattern of phasing each time you play. You can also control the Phaser directly using the modulation source.

Stereo In - Stereo Out
Left		Wet / Dry
		Phaser
		Resonance
		High Damp
		Phaser
Right		Wet / Dry
D-mod	D-mod
	EG Attack/Decay	Sweep Mode
		EG

	L Manu Bottom (L Manual Bottom)		0...100
a	Sets the lower limit of the frequency range for the effect on the left
	channel		☞ Fx:09
	L Manu Top (L Manual Top)		0...100
b	Sets the upper limit of the frequency range for the effect on the left
	channel		☞ Fx:09
	R Manu Bottom (R Manual Bottom)		0...100
c	Sets the lower limit of the frequency range for the effect on the right
	channel		☞ Fx:09
	R Manu Top (R Manual Top)		0...100
d	Sets the upper limit of the frequency range for the effect on the right
	channel		☞ Fx:09
	Swp Mode (Sweep Mode)		EG, Dmod
	Determines whether the flanger is controlled by the envelope gener-
e	ator or by the modulation source	☞ Fx:22,
	Src (Source)		Off...Tempo
	Selects the modulation source that triggers the EG (when EG is
	selected for Swp Mode), or modulation source that causes the
	flanger to sweep (when Dmod is selected for Swp Mode)
f	EG Attack		1...100
	Sets the EG attack speed		☞ Fx:22
g	EG Decay		1...100
	Sets the EG decay speed		☞ Fx:22
h	Resonance		–100...+100
	Sets the resonance amount		☞ Fx:23
i	High Damp		0...100%
	Sets the resonance damping amount in the high range		☞ Fx:23
	W/D (Wet/Dly)	–Wet...–1:99, Dry, 1:99...Wet
	Sets the balance between the effect and dry sounds
		☞ Fx:10, 23,
j	(Source)		Off...Tempo
	Selects the modulation source of the effect balance
	(Amount)		–100...+100
	Sets the modulation amount of the effect balance

Effect

177