Korg Electric Keyboard manual Prog 2.1 Ed-Basic, Basic Prog Basic, 1a Oscillator, 1b Voice Assign

PROG 2.1: Ed–Basic

Here you can make basic settings for the oscillator(s).

2.1–1: Basic (Prog Basic)

2.1–1a

2.1–1b

2.1–1c

2.1–1d

2.1–1a: Oscillator

Mode (Oscillator Mode) [Single, Double, Drums]

Specifies the basic program type; whether it will use one or two oscillators, or a drum kit.

Single: The program will use one oscillator (Oscillator 1, Filter 1, Amplifier 1). In this case the program will have a maximum of 62-note polyphony.

Double: The program will use two oscillators (Oscillator 1/ 2, Filter 1/2, Amplifier 1/2). Allowing you to create more complex sounds. In this case the program will have a maxi- mum of 31-note polyphony.

Drums: The program will use one oscillator (as when Sin- gle is selected), but Oscillator 1 will be assigned a drum kit instead of a multisample. In this case the program will have a maximum of 62-note polyphony.

2.1–1b: Voice Assign

Mode (Voice Assign Mode) [Poly, Mono]

Poly: The program will play polyphonically, allowing you play chords.

Mono: The program will play monophonically, producing only one note at a time.

Hold [Off, On]

On (checked): Hold is On. Even when you take your finger off of the key, the note will continue sounding as if it contin- ued to be held. Unless the “Amp1 EG”, “Amp2 EG” (5.1–3a, 5.2–3) “S (Sustain Level)” is set to 0, the sound will continue playing.

This is ideal for playing drum sounds, If you set “Mode (Oscillator Mode)” (2.1–1a) to Drums, you should normally- turn Hold On.

Off (unchecked): Hold is Off. Except for drum programs, you should normally set Hold Off.

If you turn “Hold” On for a drum program, keys of the selected drum kit whose “Enable Note Off” parameter (GLOBAL 5.1–3a) is unchecked will be set to Hold On. Keys that are checked will be set to Hold Off. If you select Hold Off, the keys will be set to Hold Off regard- less of their “Enable Note Off” setting.

Single Trigger [Off, On]

This is available when the “Mode (Voice Assign Mode)” set- ting is set to Poly.

On (checked): When the same note is played repeatedly, the previous note will be silenced before the next note is sounded, so that the notes do not overlap.

Legato [Off, On]

This is available when the “Mode (Voice Assign Mode)” set- ting is set to Mono.

On (checked): Legato is on. When multiple note-on mes- sages occur, the first note-on will retrigger the sound, and the second and subsequent note-ons will not retrigger.

When legato is on, multiple note-on message will not retrig- ger the voice. If one note is already on and another note is turned on, the oscillator sound, envelope, and LFO will not be reset, and only the pitch of the oscillator will be updated. This setting is effective for wind instrument sounds and analog synth-type sounds.

Off (unchecked): Legato is off. Notes will always be retrig- gered when note-on occurs.

When legato is off, multiple note-on’s will retrigger the voice at each note-on. The oscillator sound, envelope, and LFO will be reset (and retriggered) according to the settings of the program.

If “Legato” is checked, certain multisamples or key- board locations may produce an incorrect pitch.

Priority [Low, High, Last]

This parameter is valid when “Mode (Voice Assign Mode)” is set to Mono.

It specifies which note will be given priority to play when two or more notes are played simultaneously.

Low: Lowest note will take priority.

High: Highest note will take priority.

Last: Last note will take priority.

2.1–1c: Scale

Type (Scale Type)

[Equal Temperament…User Octave 15]

Indicates the basic scale for the internal tone generator.

Equal Temperament: This is the most widely used scale, where each semitone step is spaced at equal pitch intervals.

Pure Major: In this temperament, major chords of the selected tonic will be perfectly in tune.

Pure Minor: In this temperament, minor chords of the selected tonic will be perfectly in tune.

Arabic: This scale includes the quarter-tone scale used in Arabic music.

Pythagoras: This scale is based on ancient Greek musical theory, and is especially effective for playing melodies.

Werkmeister (Werkmeister III): This is an equal tempered scale that was used since the later Baroque period.

Kirnberger (Kirnberger III): This scale was created in the 18th century, and is used mainly to tune harpsichords.

Slendro: This is an Indonesian gamelan scale in which an octave consists of five notes.

When “Key” is set to C, use the C, D, F, G and A notes. (Other keys will sound equal-tempered pitches.)

Pelog: This is an Indonesian gamelan scale in which an octave consists of seven notes.

When “Key” is set to C, use the white keys. (The black keys will sound the equal tempered pitches.)

Stretch: This tuning is used for acoustic pianos.

User All Notes: This is the full-range scale (C–1 – G9) that is specified in “User All Notes Scale” (GLOBAL 3.1–2a).

User Octave 00–15:These are the single-octave scales that are specified in “User Octave Scale” (GLOBAL 3.1–1a).

7.2 7.1 6.1 5.3 5.2 5.1 4.2 4.1 3.1 2.2 2.1 1.1 PROG

5