Korg Electric Keyboard manual Reverb, Rev Hall, Rev Smth. Hall, Rev Wet Plate, Rev Dry Plate

	InLvl Mod (Input Level Mod [%])	–100...+100
h	Sets the modulation amount of the input level	☞ Fx:37,
	Src (Source)	Off...Tempo
	Selects the modulation source for the input level	☞ Fx:37
	W/D (Wet/Dly)	Dry, 1:99...99:1, Wet
	Sets the balance between the effect and dry sounds
i	(Source)	Off...Tempo
	Selects the modulation source of the effect balance
	(Amount)	–100...+100
	Sets the modulation amount of the effect balance

a: BPM, a: Rhythm

With the tempo specified by the “BPM” parameter (or the MIDI Clock tempo if “BPM” is set to MIDI), the length of one beat equals the feedback delay time, and the interval between taps becomes equal. Selecting a rhythm will automatically turn the tap outputs on and off. When “BPM” is set to MIDI, the lower limit of the “BPM” is 44.

Reverb

Reverb effects

These effects simulate the ambience of reverberation in con- cert halls.

52: Rev Hall

(Reverb Hall)

This hall-type reverb simulates the reverberation of mid-size concert halls or ensemble halls.

53: Rev Smth. Hall

(Reverb Smooth Hall)

This hall-type reverb simulates the reverberation of larger halls and stadiums, and creates a smooth release.

54: Rev Wet Plate

(Reverb Wet Plate)

This plate reverb simulates warm (dense) reverberation.

55: Rev Dry Plate

(Reverb Dry Plate)

This plate reverb simulates dry (light) reverberation.

Wet: Mono In - Stereo Out / Dry: Stereo In - Stereo Out
Left		Wet / Dry
EQ Trim	Pre Delay Thru
LEQ	HEQ
+	Pre Delay	Reverb
EQ Trim
Right		Wet / Dry

a	Reverb Time	0.1...10.0s
	Sets the reverberation time
b	High Damp	0...100%
	Sets the damping amount in the high range
c	Pre Delay	0...200ms
	Sets the delay time from the dry sound		☞
d	Pre Delay Thru	0...100%
	Sets the mix ratio of non-delay sound		☞
e	Pre EQ Trim	0...100
	Sets the EQ input level
	LoEQ (Pre Low EQ Gain)	–15...+15dB
f	Sets the gain of Low EQ
	HiEQ (Pre High EQ Gain)	–15...+15dB
	Sets the gain of High EQ
	W/D (Wet/Dly)	Dry, 1:99...99:1, Wet
	Sets the balance between the effect and dry sounds
g	(Source)	Off...Tempo
	Selects the modulation source of the effect balance
	(Amount)	–100...+100
	Sets the modulation amount of the effect balance

c: Pre Delay, d: Pre Delay Thru

The “Pre Delay” sets the delay time to the reverb input, allowing you to control spaciousness.

Effect

193