Korg Electric Keyboard manual Master EQ, 209

Master EQ

Master EQ

Use 7.2: MasterFX MEQ page in Program, Combination

modes and 7.2: Master FX MEQ page in Sequencer mode.

You cannot use the Master EQ in Sampling mode.

You cannot use the Master EQ for the Insert Effect or Master

Effects.
Low	Mid	High
Left		L/Mono
LEQ	PEQ	HEQ
LEQ	PEQ	HEQ
Right		R
Low Gain Mod.		High Gain Mod.
D-mod
Low Gain Mod - Src
D-mod
High Gain Mod - Src

	Low Cutoff	20...1.00KHz
a	Sets the cutoff frequency of Low EQ (shelving type)
	Gain	–18.0...+18.0 (0.5step)dB
	Sets the gain of Low EQ
	Mid Cutoff	300...10.00KHz
	Sets the cutoff frequency of Mid EQ (peaking type)
	Q	0.5...10.0 (0.1step)

bSets the band width of Mid EQ. With a higher value, the band become narrower.

	Gain	–18.0...+18.0 (0.5step)dB
	Sets the gain of Mid EQ
	High Cutoff	500...20.00KHz
c	Sets the cutoff frequency of High EQ (shelving type)
	Gain	–18.0...+18.0 (0.5step)dB
	Sets the gain of High EQ
d	Low Gain Mod-Src	Off...Tempo
	Selects the modulation source for Low Gain
e	High Gain Mod-Src	Off...Tempo
	Selects the modulation source for High Gain

a: Gain, b: Gain, c: Gain

These parameters are linked with the “Master EQ Gain [dB]” (7.2– 1c) parameter of the Master FX.

d: Low Gain Mod-Src

For example, when this parameter is set to Kb1#17, you can con- trol the EQ gain in the range from –18dB to +18dB during perfor- mance using the [REALTIME CONTROLS] knob. At this time, set Knob 1-B to Knob Mod1 (CC#17) for “Knob B-Assign” (Program, Combination, Sequencer 2.2–1a). The 12 o’clock position of the knob corresponds to the “Low Gain” value here.

e: High Gain Mod-Src

For example, when this parameter is set to Kb2#19, you can con- trol the EQ gain in the range from –18dB to +18dB during perfor- mance using the [REALTIME CONTROLS] knob. At this time, set Knob 2-B to Knob Mod2 (CC#19) for “Knob B-Assign” (Program, Combination, Sequencer 2.2–1a). The 12 o’clock position of the knob corresponds to the High Gain value here.

Effect

209