Korg Electric Keyboard manual Mono → Mono Chain, 58 P4EQ-Exciter, 59 P4EQ-Wah, 195

Mono → Mono Chain

Effects that combine two mono effects connected in series

58: P4EQ–Exciter

(Parametric 4-Band EQ – Exciter)

This effect combines a mono-type four-band parametric equalizer and an exciter.

Wet: Mono In - Mono Out / Dry: Stereo In - Stereo Out
Left	Wet / Dry
Parametric 4Band EQ	Exciter
+	Exciter
Trim
Right	Wet / Dry

a	[PEQ] Trim	0...100
	Sets the parametric EQ input level
	B1 (Band1 Cutoff)	20...1.00kHz
	Sets the center frequency of Band 1
b	Q	0.5...10.0
	Sets the bandwidth of Band 1	☞ Fx:06
	G (Gain)	–18...+18dB
	Sets the gain of Band 1
	B2 (Band2 Cutoff)	50...5.00kHz
	Sets the center frequency of Band 2
c	Q	0.5...10.0
	Sets the bandwidth of Band 2	☞ Fx:06
	G (Gain)	–18...+18dB
	Sets the gain of Band 2
	B3 (Band3 Cutoff)	300...10.00kHz
	Sets the center frequency for Band 3
d	Q	0.5...10.0
	Sets the bandwidth of Band 3	☞ Fx:06
	G (Gain)	–18...+18dB
	Sets the gain of Band 3
	B4 (Band4 Cutoff)	500...20.00kHz
	Sets the center frequency for Band 4
e	Q	0.5...10.0
	Sets the bandwidth of Band 4	☞ Fx:06
	G (Gain)	–18...+18dB
	Sets the gain of Band 4
f	[XCT] Blend (Exciter Blend)	–100...+100
	Sets the intensity (depth) of the Exciter effect	☞ Fx:11
g	Emphatic Point	0...70
	Sets the frequency range to be emphasized	☞ Fx:11
	W/D (Wet/Dly)	Dry, 1:99...99:1, Wet
	Sets the balance between the effect and dry sounds
h	(Source)	Off...Tempo
	Selects the modulation source of the effect balance
	(Amount)	–100...+100
	Sets the modulation amount of the effect balance

59: P4EQ–Wah

(Parametric 4-Band EQ – Wah/Auto Wah)

This effect combines a mono-type four-band parametric equalizer and a wah. You can change the order of the connec-

tion.
Wet: Mono In - Mono Out / Dry: Stereo In - Stereo Out
Left		Wet / Dry
	Routing
Parametric 4Band EQ	Wah/Auto Wah
+	Wah
Trim
Right	Sweep Mode	Wet / Dry
	Envelope Auto
	D-mod D-mod
	LFO
	LFO

a	[PEQ] Trim		0...100
	Sets the parametric EQ input level
	B1 (Band1 Cutoff)		20...1.00kHz
	Sets the center frequency of Band 1
b	Q		0.5...10.0
	Sets the bandwidth of Band 1		☞ Fx:06
	G (Gain)		–18...+18dB
	Sets the gain of Band 1
	B2 (Band2 Cutoff)		50...5.00kHz
	Sets the center frequency of Band 2
c	Q		0.5...10.0
	Sets the bandwidth of Band 2		☞ Fx:06
	G (Gain)		–18...+18dB
	Sets the gain of Band 2
	B3 (Band3 Cutoff)		300...10.00kHz
	Sets the center frequency for Band 3
d	Q		0.5...10.0
	Sets the bandwidth of Band 3		☞ Fx:06
	G (Gain)		–18...+18dB
	Sets the gain of Band 3
	B4 (Band4 Cutoff)		500...20.00kHz
	Sets the center frequency for Band 4
e	Q		0.5...10.0
	Sets the bandwidth of Band 4		☞ Fx:06
	G (Gain)		–18...+18dB
	Sets the gain of Band 4
	[WAH] FreqBtm (Frequency Bottom)		0...100
f	Sets the lower limit of the wah center frequency		☞ Fx:09
	Top (Frequency Top)		0...100
	Sets the upper limit of the wah center frequency		☞ Fx:09
	Swp Mode (Sweep Mode)		Auto, Dmod, LFO
	Selects the control from auto-wah, modulation source, and LFO
g			☞ Fx:09,
	Src (Source)		Off...Tempo
	Selects the modulation source for the wah when Sweep Mode=D-
	mod
	lfoF (LFO Frequency)		0.02...20.00Hz
	Sets the LFO speed
h	Res (Resonance)		0...100
	Sets the resonance amount
	LPF (Low Pass Filter)			Of, On
	Switches the wah low pass filter on and off
i	[Routing]	PEQ →	WAH, WAH → PEQ
	Changes the order of the parametric equalizer and wah connection
	W/D (Wet/Dly)		Dry, 1:99...99:1, Wet
	Sets the balance between the effect and dry sounds
j	(Source)		Off...Tempo
	Selects the modulation source of the effect balance
	(Amount)		–100...+100
	Sets the modulation amount of the effect balance

Effect

195