Korg Electric Keyboard manual 1b Combination Information, Cat.HOLD, Write Combination

Category [00...15: name]

This is the combination category display.

All combinations are organized into sixteen categories. You can select a category, and then select from combinations that belong to that category.

To select combinations by category, use “Cat.HOLD” and Utility “Select by Category.” (☞ PROG 1.1–1a)

To specify the category for a combination, use Utility “Write Combination” (1.1–1c). To modify a category name, use “Category Name Comb. 00–07, 08–15” (GLOBAL 4.1–3/4).

Cat.HOLD

Press the [./HOLD] key and the display will indicate

. The category will be held (fixed). (☞ PROG 1.1– 1a)

To cancel, press the [./HOLD] key twice to turn off the display.

10’s HOLD

When you press the [./HOLD] key a second time, the dis-

play will indicate , and the first digit of the combi- nation number will be fixed. (☞ PROG 1.1–1a)

To cancel, press the [./HOLD] key to turn off the display.

(Tempo) [040...240, EXT]

Sets the tempo of the arpeggiator. This can be adjusted by the REALTIME CONTROLS C-mode [TEMPO] knob.

EXT will be displayed if “MIDI Clock” (GLOBAL 2.1–1a) is set to External, and the arpeggiator will synchronize to the MIDI clock received from an external MIDI device.

This parameter can also be set from 6.1: Ed-Arp.

1.1–1b: Combination Information

This displays information for the selected combination. The functions assigned to [SW1], [SW2], and REALTIME CON- TROLS B-mode [ASSIGNABLE 1–4] knobs will be dis- played.

■1.1–1c: UTILITY

For details on how to select the desired utility function, refer to “PROG 1.1–1c: UTILITY.”

Write Combination

This command writes an edited combination into this instrument’s internal memory. Be sure to write any combi- nation that you wish to keep. If the power is turned off or a different combination selected before you write an edited combination, your edits cannot be recovered.

For the procedure, refer to “Write Program” (PROG 1.1–1c).

If you use “Category” to specify a category for the combina- tion that you are writing, you will be able to select it by cate- gory when selecting combinations in COMBI 1.1: Play.

When you press the [REC/WRITE] key, the “Update Combination” dialog box will appear. Here also you can write to the currently selected combination.

Solo Selected Timbre

The Solo function will alternately be switched on/off each time you select “Solo Selected Timbre.”

1From the utility menu, choose “Solo Selected Timbre,” and press the [F8] (“OK”) key to execute the command. When you execute this, a check mark will appear at the left of the “Solo Selected Timbre” menu item, and the Solo function will be on.

2In pages that show parameters for an individual timbre, you can select a timbre to Solo (in 1.1: Play, Prog page “Program Select,” etc.) so that only that timbre will sound and the other timbres will be muted. The “Selected Timbre Information” (1.1–2d) in each page will indicate “Solo.”

To solo a different timbre, select a parameter of the tim- bre that you wish to solo.

You can move to timbres “T1”–“T8” by holding down the [TIMBRE/TRACK] key and pressing one of the [F1](T1/T9)–[F8](T8/T16) keys.

3To defeat the Solo function, choose “Solo Selected Tim- bre” from the utility menu once again, and press the [F8] (“OK”) key to cancel it.

If a timbre that is muted by the Solo function has been set to a “Status” (3.1–1a) of EXT or EX2, MIDI note-on/ off messages will not be transmitted by that timbre.

Select by Category

Selects a combination by category.

For the procedure, refer to “Select by Category” (☞ p.2)

32