Korg Electric Keyboard manual 129, AfterT After Touch Off, On, Ctrl Change Control Change Off, On

AfterT (After Touch) [Off, On]

On (checked): MIDI after touch messages will be transmit- ted and received.

Off (unchecked): MIDI after touch messages will neither be transmitted nor received.

When recording sounds that do not require the use of after touch, you can uncheck this parameter to save memory. This setting has no effect when you use the internal sequencer to playback sequence data that was recorded with after touch data; i.e., after touch will be transmitted via MIDI. This instrument’s keyboard transmits only channel after touch; it does not transmit polyphonic after touch. However, since this instrument does support polyphonic after touch as an Alternate Modulation Source (AMS), it can receive poly- phonic after touch to control individual notes.

Ctrl Change (Control Change) [Off, On]

On (checked): Control change messages will be transmitted and received.

Off (unchecked): Control change messages will neither be transmitted nor received.

This setting has no effect when you use the internal sequencer to playback sequence data that was recorded with control change data; i.e., control changes will be transmitted via MIDI.

Exclusive [Off, On]

On (checked): System exclusive data will be transmitted and received. Check this setting when you wish to use a connected computer etc. to edit this instrument, or vice versa.

Off (unchecked): System exclusive data will neither be transmitted nor received. Normally you will leave this unchecked.

However, system exclusive data will be transmitted and received while the page menu commands (““Dump Pro- gram”–”Dump All”) of this page are displayed.

■2.1–1c: UTILITY

☞“Write Global Setting” (1.1–1d)

Dump Program

Dump Combination

Dump Drum Kit

Dump Arpeggio Pattern

Dump Global Setting

Dump Sequencer

Dump All

These commands allow this instrument’s data to be trans- mitted to another connected TRITON Le, MIDI data filer, or computer in the form of system exclusive data.

Selects the data to be dumped from the Utility menu (see the table below) to access the dialog box.

As necessary, select the bank and number of the data to be dumped, and press [F8] (“OK”) key.

Dump Program	Programs of all banks, programs of the
	specified bank, one program
Dump Combination	Combinations of all banks, combinations of
	the specified bank, one combination
Dump Drum Kit	All drum kits, One drum kit
Dump Arpeggio Pattern	All arpeggio patterns, One arpeggio pattern
Dump Global	Global settings (except for the Drum Kits
	and User Arpeggio Patterns of Global
	mode)
Dump Sequencer	All sequences
Dump All	All banks of programs + combinations +
	drum kits + arpeggio patterns + global set-
	tings + sequences

Transmission

Do not touch this instrument’s switches or turn off the power while data is being transmitted.

Data dump transmission procedure

1Connect this instrument to the device that will receive the data dump.

If you are using a computer that is able to receive MIDI exclusive data, connect the computer’s MIDI interface (connected to the computer) to the MIDI OUT connector of this instrument. (☞ p.229)

If you are using a MIDI data filter etc., connect this instrument’s MIDI OUT connector to the MIDI IN con- nector of the MIDI data filter.

2Select 2.1: MIDI.

3In the Utility menu, select the data that you wish to dump.

Shown below the “Dump Program” screen.

If you wish to dump all program data, set “Program” to All.

If you wish to dump data for an individual bank, set “Program” to Bank, and specify the bank number below it. If you wish to dump data for an individual program, set “Program” to Single, and specify the program num- ber below it.

4Press the [F8] (“OK”) key to transmit the data.

While the data is being transmitted, the display will indi- cate “Now transmitting data.”

The data size and the time required for transmission will depend on the type of data.

For the size and the time required to dump each type of data, refer to the table below.

Type of data dumped	Data size (kByte)	Time required
		(Sec)
Program All	260.2	83.3
Program Bank (A/B/C/D)	65.0	20.8
Program Single (A/B/C/D)	0.5	0.2
Combination All	154.5	49.5
Combination Bank (A/B/C)	51.5	16.5
Combination Single (A/B/C)	0.4	0.2
Drum Kit All	112.8	36.1
Drum Kit Single	4.7	1.6
Arpeggio Pattern All	79.0	25.3
Arpeggio Pattern Single	0.4	0.2
Global Setting	1.0	0.4
Sequencer Data	10.5–1371	3.4–438.8
All	617.6–1772.3	197.7–567.2

6.1 5.1 4.1 3.1 2.1 1.1 GLOBAL

129