Korg Electric Keyboard ER/Delay, 187, Early Reflections, Early reflection and delay effects

When “(Sw)” = Mmnt (Moment), the speaker is rotating. It stops only when you press the pedal or operate the joystick.

Rotation will occur when the value of the modulation source is less than 64, and will stop when the value is 64 or greater.

b: (Sw)

This parameter sets how the rotation speed (slow and fast) is switched via the modulation source.

When “(Sw)” = Tggl (Toggle), the speed is switched between slow and fast each time you press the pedal or operate the joy- stick.

Slow/fast will alternate each time the value of the modula- tion source exceeds 64.

When “(Sw)” = Mmnt (Moment), the speed is usually slow. It becomes fast only when you press the pedal or operate the joy- stick.

When a value for the modulation source is less than 64, “slow” speed is selected, and when the value is 64 or higher, “fast” is selected.

c: ManuSp

If you wish to control the speaker rotation speed manually, not switching between Slow and Fast, select the modulation source in the “ManuSp” field. If manual control is not necessary, set this field to Off.

d: Horn Accel, e: Rotor Accel

On a real rotary speaker, the rotation speed is accelerated or decel- erated gradually after you switch the speed. The “Horn Accel” parameter sets the speed at which the rotation is accelerated or decelerated.

f: MicDistance, f: Spread

This is a simulation of stereo microphone settings.

	Rotary Speaker - Mic Placement
Microphone	Mic Spread
	Microphone
Mic Distance	Mic Distance
Rotary Speaker (Top View)

ER/Delay

Early reflection and delay effects

41: Early Reflect

(Early Reflections)

This effect is only the early reflection part of a reverberation sound, and adds presence to the sound. You can select one of the four decay curves.

Wet: Mono In - Stereo Out / Dry: Stereo In - Stereo Out
Left		Wet / Dry
EQ Trim
LEQ	HEQ
+	Pre Delay	Early Reflections
EQ Trim
Right		Wet / Dry

a	Type	Sharp, Loose, Modulated, Reverse
	Selects the decay curve for the early reflection			☞
b	ER Time		10...800ms
	Sets the time length of early reflection
c	Pre Delay		0...200ms
	Sets the time taken from the original sound to the first early reflection
d	Pre EQ Trim		0...100
	Sets the input level of EQ applied to the effect sound
	LoEQ (Pre Low EQ Gain)		–15.0...+15.0dB
e	Sets the gain of Low EQ
	HiEQ (Pre High EQ Gain)		–15.0...+15.0dB
	Sets the gain of High EQ
	W/D (Wet/Dly)		Dry, 1:99...99:1, Wet
	Sets the balance between the effect and dry sounds
f	(Source)		Off...Tempo
	Selects the modulation source of the effect balance
	(Amount)		–100...+100
	Sets the modulation amount of the effect balance

a: Type

This parameter selects the decay curve for the early reflection.

Early Reflections - Type

Sharp

Loose

Modulated

Reverse

Dry
	Pre Delay	ER Time

Effect

187