Korg Electric Keyboard manual Save Template Song Save as User Template Song, FF/REW Speed

If you execute without checking this, only the template song you specified in step 2 will be loaded.

4To load the template song, press the [F8] (“OK”) key. To cancel without loading, press the [F7] (“Cancel”) key. When you execute, song settings other than Play Loop and RPPR will be copied.

If in step 3 you checked “Copy Pattern to Track too?” and pressed the [F8] (“OK”) key, the “Copy Pattern To Track” dialog box will appear.

This dialog box is the same as in 5.1: RPPR, Pattern page, utility menu command “Copy To Track” (☞ p.71).

5In “Pattern,” select the pattern that you wish to copy. If you press the [START/STOP] key, the selected pattern will play.

In To “Track,” select the copy destination track.

In “Measure,” specify the beginning measure of the copy destination.

Track 1 of all sixteen preset template songs contains a drum category program. (In preset template songs P02, P04, P08, and P15 drum category programs are speci- fied for multiple tracks.)

The pattern names of the 150 preset patterns indicate the musical genre and part of the optimal drum cate- gory program. (☞ The table in the previous page)

For example in P00: Pop&Balad 1/Std, the musical genre is “Pop&Balad 1,” and “Std” is part of the name of the drum category program that is most suitable. By loading the drum track for these preset template songs and the corresponding preset patterns, you can efficiently set up a drum track that is suited to each pre- set template song.

6To execute, press the [F6] (“Copy”) key. When you exe- cute, “Measure” will count up automatically. You may then copy patterns as well. To exit the command, press the [F7] (“Exit”) key.

(Example)

Load preset template song P00: Pop/Ballade together

with preset pattern P01: Pop&Balad 2/Std into song S000.

1Select “Load Template Song” to access this dialog box.

2In “From,” select P00: Pop/Ballade.

3Check “Copy Pattern to Track too?”

4Press the [F8] (“OK”) key to access the “Copy Pattern To Track” dialog box.

5Set “Pattern” to Preset to select preset patterns, and select one of the patterns P00: Pop&Balad 1/Std–

P07: Pop&Balad 8/Std for the pattern name. (Preset tem-

plate song P00: Pop/Ballade specifies program A020: Standard Kit 1 for track 1.) If you wish to play the selected pattern, press the [START/STOP] key. If you wish to adjust the tempo, use the [TEMPO] knob. For this example, select P01: Pop&Balad 2/Std.

6Set To:”Track” to 01, and “Measure” to 001.

7Press the [F6] (“Copy”) key once. The eight-measure pre- set pattern P01: Pop&Balad 2/Std has now been copied to the song. “Measure” will count-up automatically.

By repeating steps 5 and 7 you can continue to copy other patterns. When you press the [F7] (“Exit”) key, the dialog box will close.

Save Template Song (Save as User Template Song)

This command saves the program selections, track parame- ters, and effect settings etc. of the song as a user template song U00–15.

1Select “Save Template Song” to access the dialog box.

2In “To,” specify the user template song (U00–15) in which the data will be saved.

3To save the template song, press the [F8] (“OK”) key. To cancel, press the [F7] (“Cancel”) key.

Be aware that when you execute this command, all set- ting data of the save destination User Template Song will be erased and rewritten.

FF/REW Speed

This allows you to set the speed at which fast-forward or rewind will occur when you press the [FF] key or [REW] key.

1Select “FF/REW Speed” to access the dialog box.

2In “Speed,” specify the speed (relative to the playback tempo) at which fast-forward and rewind will occur. With a setting of 2, this will occur at double the playback tempo; with a setting of 3, triple the tempo; and with a setting of 4, quadruple the tempo. However in sections where the playback data is dense, the fast-forward or rewind speed may slow down.

3If “Ignore Tempo” is checked, the playback tempo and note length will be ignored, and fast-forward and rewind will be performed as fast as possible. The speed of fast- forward and rewind will differ between sections where the playback data is dense and sections where it is sparse. If this item is unchecked, fast-forward and rewind will be performed at the speed you specify for “Speed.”

4To execute the settings, press the [F8] (“OK”) key. To can- cel, press the [F7] (“Cancel”) key.

Set Location (Set Location for Locate Key)

When you press the [LOCATE] key, you will move to the location specified here.

1Select “Set Location” to access the dialog box.

2In “Location,” specify the location to which you will move when you press the [LOCATE] key. If you specify 001:01:000, you will move to the beginning of the song when you press the [LOCATE] key.

3To execute the settings, press the [F8] (“OK”) key. To can- cel, press the [F7] (“Cancel”) key.

7.2 7.1 6.1 5.2 5.1 4.4 4.3 4.2 4.1 3.4 3.3 3.2 3.1 2.2 2.1 1.2 1.1 SEQ

53