Korg Electric Keyboard manual 81 OD/HG-Phaser, 82 OD/HG-M.Dly, 205, Overdrive/Hi.Gain Phaser

81: OD/HG–Phaser

(Overdrive/Hi.Gain – Phaser)

This effect combines a mono-type overdrive/high-gain dis- tortion and a phaser. You can change the order of the effect

connection.
Wet: Mono In - Stereo Out / Dry: Stereo In - Stereo Out
Left			Wet / Dry
		Routing
	Overdrive / Hi-Gain
		Phaser
	3 Band PEQ
+	Driver	Phaser	Normal
	Output Level	+
			Output Mode
		–	Wet Invert
	Mode: Overdrive / Hi-Gain	Resonance
	Drive	Phaser Wet / Dry
Right			Wet / Dry
		LFO: Tri / Sine

	[OD] Mode (Drive Mode)	OverD, Hi-Gain
a	Switches between overdrive and high-gain distortion
	Drive	1...100
	Sets the degree of distortion	☞ Fx:06
	Level (Output Level)	0...50
	Sets the overdrive output level	☞ Fx:06,
b	(Source)	Off...Tempo
	Selects the modulation source for the overdrive output level
	(Amount)	–50...+50
	Sets the modulation amount of the overdrive output level
	Lo (Low Cutoff)	20...1.00kHz
c	Sets the center frequency for Low EQ (shelving type)
	G (Gain)	–18...+18dB
	Sets the gain of Low EQ
	M1 (Mid1 Cutoff)	300...10.00kHz
	Sets the center frequency for Mid/High EQ 1 (peaking type)
d	Q	0.5...10.0
	Sets the band width of Mid/High EQ 1	☞ Fx:06
	G (Gain)	–18...+18dB
	Sets the gain of Mid/High EQ 1
	M2 (Mid2 Cutoff)	500...20.00kHz
	Sets the center frequency for Mid/High EQ 2 (peaking type)
e	Q	0.5...10.0
	Sets the band width of Mid/High EQ 2	☞ Fx:06
	G (Gain)	–18...+18dB
	Sets the gain of Mid/High EQ 2
	[PHS] LFO (LFO Waveform)	Tri, Sine
f	Selects the LFO waveform of the phaser
	F (LFO Frequency)	0.02...20.00Hz
	Sets the LFO speed
	Manu (Manual)	0...100
	Sets the frequency to which the effect is applied
g	Dep (Depth)	0...100
	Sets the depth of LFO modulation
	Res (Resonance)	–100...+100
	Sets the resonance amount	☞ Fx:23
	Phs W/D (Phaser Wet/Dry)	–Wet...–2:98, Dry, 2:98...Wet
h	Sets the phaser effect balance	☞ Fx:10, 23
	Out (Output Mode)	Normal, Wet Inv
	Selects the phaser output mode	☞ Fx:67
	[Routing]	OD → PHS, PHS → OD
i	Switches the order of the overdrive and phaser connection
		☞ Fx:67
	W/D (Wet/Dly)	Dry, 1:99...99:1, Wet
	Sets the balance between the effect and dry sounds
j	(Source)	Off...Tempo
	Selects the modulation source of the effect balance
	(Amount)	–100...+100
	Sets the modulation amount of the effect balance

82: OD/HG–M.Dly

(Overdrive/Hi.Gain – Multitap Delay)

This effect combines a mono-type overdrive/high-gain dis- tortion and a multitap delay.

Wet: Mono In - Mono Out / Dry: Stereo In - Stereo Out

Left Wet / Dry

	Overdrive / Hi-Gain	Multitap Delay
+	3 Band PEQ	Feedback
	Driver	Delay
		(2)
	Output Level	High Damp (1)

Mt.Dly Wet / Dry

Mode: Overdrive / Hi-Gain

Drive

Right Wet / Dry

	[OD] Mode (Drive Mode)	OverD, Hi-Gain
a	Switches between overdrive and high-gain distortion
	Drive	1...100
	Sets the degree of distortion	☞ Fx:06
	Level (Output Level)	0...50
	Sets the overdrive output level	☞ Fx:06,
b	(Source)	Off...Tempo
	Selects the modulation source for the overdrive output level
	(Amount)	–50...+50
	Sets the modulation amount of the overdrive output level
	Lo (Low Cutoff)	20...1.00kHz
c	Sets the center frequency for Low EQ (shelving type)
	G (Gain)	–18...+18dB
	Sets the gain of Low EQ
	M1 (Mid1 Cutoff)	300...10.00kHz
	Sets the center frequency for Mid/High EQ 1 (peaking type)
d	Q	0.5...10.0
	Sets the band width of Mid/High EQ 1	☞ Fx:06
	G (Gain)	–18...+18dB
	Sets the gain of Mid/High EQ 1
	M2 (Mid2 Cutoff)	500...20.00kHz
	Sets the center frequency for Mid/High EQ 2 (peaking type)
e	Q	0.5...10.0
	Sets the band width of Mid/High EQ 2	☞ Fx:06
	G (Gain)	–18...+18dB
	Sets the gain of Mid/High EQ 2
	[DLY] T1 (Tap1 Delay)	0...680ms
f	Sets the Tap1 delay time
	T2 (Tap2 Delay)	0...680ms
	Sets the Tap2 delay time
	T1 Level (Tap1 Level)	0...100
g	Sets the Tap1 output level	☞ Fx:45
	T2 Fb (Tap2 Feedback)	–100...+100
	Sets the Tap2 feedback amount
	Dly W/D (Delay Wet/Dry)	Dry, 2:98...98:2, Wet
h	Sets the multitap delay effect balance
	HiDamp (High Damp)	0...100%
	Sets the damping amount in the high range	☞ Fx:43
	W/D (Wet/Dly)	Dry, 1:99...99:1, Wet
	Sets the balance between the effect and dry sounds
i	(Source)	Off...Tempo
	Selects the modulation source of the effect balance
	(Amount)	–100...+100
	Sets the modulation amount of the effect balance

Effect

205